Smart Manulift Electric Chain Hoist, 275 Lb Capacity

 

Intelligent servo motor :
Precise positioning: the servo control start function enables the workpiece to lift steadily, with the speed control ratio up to 1:600, and the minimum up to 0.05m/min

The lifting speed of makes it easier to control the workpiece at a slow speed;

Efficient work: the fastest lifting (1.9 times higher than the normal speed) at no load or less than 10% of the rated load to ensure efficient work

With the servo control feature, the load weight can be effectively calculated for speed limit, overload and deceleration;

The enclosure protection grade is IP55.

General features :

Rapid speed
The quickest lifting speed of wire rope type station intelligent hoist can reach

44m/min

Up to 30 m/min), within the rated range, with any variable speed

Degrees to achieve efficient workpiece handling
High accurate :
The slowest speed of station intelligent hoist is 0.05m/min (zero at the slowest speed

Quick-lift) to ensure seamless connection and precision of machined parts

Alignment.
Stable
The station intelligent hoist has stable control speed, almost no vibration and high efficiency

It is characterized by low heating rate, high control. Within the rated operation area

Constant torque, low inertia, fast response of the system, no noise, no work

The parts shake, shake and bounce off the ground during movement

 

Model number	NO	V3S010	V3S020	V3S030	V3S060
Max Load(kg)		100	200	300	600
Maximum lifting speed - handle mode (m/minute)		44	44	35	17
Maximum lifting speed - floating mode (m/min) optiona		25	25	18	9
Power consume(Kw)		0.8	0.8	1.1	1.1
Vertical maximum stroke(m)		2.5	2.5	2.5	2
Control model		Coaxial pressure handle
Product weight(Kg)		40kg	43kg	45kg	45kg
Power supply		Stand 220V(Optional 380V)
Organization work level		M5	M5	M5	M4
Operating ambient temperature range (no condensation)		5 - 55ºC
Humidity range of working environment (no condensation)		35 - 90ºC No condensation

 

Application:

Similar to ceramic sanitary ware, first of all, the volume is large, the workpiece is heavy, and secondly, it cannot be knocked. In the actual handling process, it is difficult to carry manually with bare hands, and the work efficiency is low, and the collision rate of articles is high. The station is equipped with a gold shaft intelligent hoist. The operator can independently complete the whole operation process of clamping, handling, angle adjustment, and safe placement of items by one person. The smooth operation of the gold shaft intelligent hoist can enable the operator to maintain a high frequency of handling rhythm and meet the requirements for the completion of items.

For high-precision object handling, the first is high precision, the workpiece cannot be bumped, and the second is heavy, so it is difficult to realize manual handling. The station is equipped with a gold shaft intelligent hoist, so that the operator can maintain a high frequency of assembly line handling, meet the high accuracy requirements of the workpiece, and avoid unnecessary collision.