3 Bank Marine Battery Charger
PRODUCT FEATURESSimultaneously charges and/or maintains up to five 6V or 12V lead acid batteries (WET, MF, AGM and GEL);6V or 12V 1.5A per charging bank;Charging voltage auto select;No risk of over-charging;Spark proof;Over heat protection;Full protected against short circuit and wrong connections;With LED indicators;Battery recovery -- For 12V batteries voltage lower than 11V±0.5V, or 6V batteries voltage lower than 5.5V±0.5V, the charger could recover the battery. It is very easy to operate.
Plug in the AC power;Now connect the output clamps/terminal rings with the battery correctly;This charger begins charging with 0.8A low current to recover the batteries automatically;
IMPORTANT -- If the battery is totally dead (below 3 volts) the Bank charger will not start. This is due to its internal safety circuit. The
charger safety circuit must sense more than 3 volts before it will allow the charger to turn on. If the battery voltage is below 3 volts, the
charger will not operate and the lights will not turn on. Have the battery checked by a dealer if the battery voltage is very low. Most 12
volt lead acid batteries are likely to be defective if their voltage is below 9 volts.TECHNICAL DATA
| Input Voltage: | 105-125VAC, 60Hz | |||||
| Output Voltage: | 6V & 12V (auto-select) | |||||
| Efficiency: | >75% | |||||
| Charging Voltage: | 14.4V±0.25V (for 12V battery) or 7.2V±0.20V (for 6V battery) | |||||
| Charging Current | TE4-0260 | TE4-0260U | TE4-0261 | TE4-0261U | TE4-0262 | TE4-0262U |
| 1.5A | 1.5A | 2A | 2A | 2A | 2A | |
| With 2 USB ports | - | Y | - | Y | - | Y |
| Bank Q"TT | 5 | 5 | 4 | 4 | 3 | 3 |
| Ambient Temp: | -10ºC to +40ºC | |||||
| Battery Types: | 6V & 12V lead-acid batteries (WET, MF, AGM and GEL) | |||||
| Housing Protection: | IP65 (Dust and Splash proof) | |||||
- 6 amp (2 amp per bank) smart on-board battery Charger for 6/12-volt batteries; charges and maintains all types of lead-acid batteries from 10-120ah, including wet, gel, MF, and AGM Safe for anyone to use. Does not generate sparks, and protects against reverse battery Hookup, short circuit, open circuit, overheat, overcurrent and does not overcharge the battery Recovers deeply discharged and sulfated batteries with pulse charging Charge three batteries at the same time
Specifications
| Model | TE4-0262 |
| Battery Type | 6V/12V STD, GEL, AGM |
| Rated AC Input Voltage | AC105-125V, 60Hz or AC220-240V, 50Hz |
| Max Output Voltage | 7.2V±0.3V, 14.4V±0.3V |
| Charging Current | 2A each, 6A total |
| Activated Voltage | 3.8V/7.5V |
| Protection | Overheat |
| Short Circuit | |
| Reverse Polarity | |
| Overcharge | |
| Housing Material | ABS |
| Ingress Protection | IP65 Water Resistant |
| Color | Customized |
| Certificate | cETL /CE-EMC/CE-LVD/ROHS |
| Weight | 1.30kgs |
| Size | 214x202x80 mm |
| Integrated Plug | EU/AU/UK/US |
ABOUT US
Tonny Electric & Tools Co., Ltd
OEMFunctional/Structural Design, Packaging customization, Accept small quantity order
CERTIFICATESWe have many certificates, such as cETL, PSE, GS, TUV, CE, RoHs, PAHs, REACH. And we have 200+ patents and 600+ different kinds of high quality products
