AC-300 Manual nozzle which manually stops fuel distribution, is used to refuel vehicles, small boats, and aircraft. The nozzle has been proven to be a reliable and fault free equipment, with a sturdy casing to prevent mechanical damage.
This nozzle is made of intrinsically safe aluminum alloy, but it has excellent durability. The joint diameter is 54 mm. To connect, a pressure sleeve with a diameter of 50 mm (DU 50 mm) was used. To access the shut-off valve, the connection joint is separated from the crane housing. The cross-sectional area for adding a faucet is generally 40 millimeters. The working temperature and ambient temperature of the hose crane are between+50 and -40 degrees. The machine head is installed on the threaded connection of crane C. The sealing of the hull bow connection is sealed with rubber rings. There is a detachable filter in the nose. When the faucet is not in use, the faucet should be closed with a lid to prevent garbage from entering the feed section. Due to the clamping bracket being fixed in three different stages, it provides different fuel release speeds.
| Inlet Thread | BSPF/NPT 1.5" | ||||||||
| Maximum Flow Rate | 300L/Min |
Generally, the lead time is 10-30 days. If you need them urgently, it's negotiable.
We have strict QC and professional test equipment, all products are 100% tested before delivery.
Yes, it is available to print your logo on the products and on the packing box according to your design.
Yes, you are welcome to visit our factory. We can also show you our factory via video call if it is not convenient for you to come.
