CHI-8784
Automatic
Diesel
1-10t
Euro 3
4×2
＜4L
≤5
150-250hp
ECE, GCC, ISO, DOT
Tubeless
Front Lifting Style
New
Flatbed Truck
Dongfeng DFAC
Nude Packing
7700*2400*2600 mm
China
87054000
Product Description
3 ton Dongfeng DFAC Low Bed Loading Excavator Loader Trailer Truck Excavator Transport Truck
Excavator carrier lorry (also called flat bed truck , excavator transport truck , machinery transport truck , flatbed lorry , low bed truck , excavator carrier truck , asphalt paver carrier truck , lorry carrier truck ) is used for transporting abject that is non removable or machinery that cann't be driven on road , such as excavator , loader , harvester , etc . It's widely used in the construction , agriculture field .
To load machinery easily , there is a tilt ramp at back of flatbed , When loading machinery on , turnover the ramp to ground , So there could be a slope between ground and flatbed . When finished loading , The ramp should be fold up and fastened by manual . According to special requirements , The ramps could be hydraulic fold and extension .
According to its driven type , there is 4*2, 6*4,8*4 flatbed truck .
Technical date:
Chassis brand
CNHTC , Beiben trucks , Shacman trucks , FAW trucks , I SUZU ,Hongyan trucks,FOTON trucks , Dongfeng trucks , JAC trucks
Truck Picture:
More Excavator carrier lorry :
Excavator carrier lorry (also called flat bed truck , excavator transport truck , machinery transport truck , flatbed lorry , low bed truck , excavator carrier truck , asphalt paver carrier truck , lorry carrier truck ) is used for transporting abject that is non removable or machinery that cann't be driven on road , such as excavator , loader , harvester , etc . It's widely used in the construction , agriculture field .
To load machinery easily , there is a tilt ramp at back of flatbed , When loading machinery on , turnover the ramp to ground , So there could be a slope between ground and flatbed . When finished loading , The ramp should be fold up and fastened by manual . According to special requirements , The ramps could be hydraulic fold and extension .
According to its driven type , there is 4*2, 6*4,8*4 flatbed truck .
Technical date:
| ITEM | UNIT | DESCRIPTION |
| Vehicle | DONGFENG tow truck wrecker | |
| Overall dimension | mm | 7470×2350×2440 |
| Flatbed dimension | 5550×2300 | |
| Curb weight | kg | Appro×4910 |
| Flatbed loading weight | Appro×4000 | |
| Carriage arm loading weight | Appro×3000 | |
| Wheel base | mm | 3800 |
| Front/Rear overhang | 1210/2460 | |
| Approach/departure angle | ° | 24°/10° |
| Standard configuration | 1) 4 tons winch 1 set | |
| 2) Auxiliary wheel 2pcs | ||
| 3) Rear towing arm assembly 1 set | ||
| 4) Steel wire rope 25m | ||
| 5) Bunding belt 4pcs | ||
| 6) Rear tail lights LED,both sides electronic lights. | ||
| 7) Tool box | ||
| Working Performance | 1. It can tow two cars. | |
| 2. Hydraulic control flatbed and carriage arm,with hydraulic operation lever. | ||
| 3. Winch speed : 8m/min. | ||
| 4. Flatbed working stroke: 2680mm | ||
| 5. Flatbed minimum tilt angle: 10° | ||
| 6. Carriage arm telescopic stroke: 1180mm | ||
| 7. The max effective length of the carriage arm: 1300mm | ||
| Chassis Parameter | ||
| Cabin | Single row cabin,air conditioner,power steering, cabin roof warning light, 3 passangers | |
| Drive type | 4×2,left /right hand dirve | |
| Engine | Brand : DONFGENG CHAOCHAI POWER | |
| Model :CY4102-E3C, 120hp | ||
| Type : diesel, 4 cylinder, turbocharged, intercooled. | ||
Chassis brand
CNHTC , Beiben trucks , Shacman trucks , FAW trucks , I SUZU ,Hongyan trucks,FOTON trucks , Dongfeng trucks , JAC trucks
Truck Picture:
More Excavator carrier lorry :
