Truck Lifting Machine 60 Ton Mobile Truck Cranes XCT60_Y
XCT60_Y Truck crane is widely used for the lifting operations in general engineering projects, such as construction site, urban renewal, communication and transportation, ports, bridge, oilfields and mine, and complex working environments.
1.5-section boom of 42 m with U-type profile is adopted; the max.lifting load is 35 t; the max. lifting height is 56.8 m; the max. working radius is 38.5 m; The performance takes the lead comprehensively.
2.New energy-saving hydraulic system with high efficiency, durability and fine control (lifting: 2.5m/min, slewing: 0.1°/s)
3.Optimal transmission system first created in the industry contributesto strong off-road performance and low oil consumption; the grade- ability is 42%.
Item | Unit | Parameter | |
Dimensions (length x width x height) | mm | 14090×2790×3630 | |
Total vehicle mass in travel configuration | kg | 42200 | |
Axle load | 1st and 2nd axle | kg | 16200 |
3rd and 4th axle | kg | 26000 | |
Engine rated power/rpm | kW/(r/min) | 247/2200 | |
Max. output torque/rpm | N.m/(r/min) | 1350/1100-1600 | |
Max. travel speed | km/h | 90 | |
Min. turning diameter | m | 24 | |
Min. ground clearance | mm | 250 | |
Approach angle | ° | 18/10 (front protective device included) | |
Departure angle | ° | 13 | |
Max. grade ability | % | 36 | |
Fuel consumption per 100 km | L | 36 | |
Max. total rated lifting capacity | t | 60 | |
Min rated working radius | m | 3 | |
Max. load moment | Base boom | kN.m | 2009 |
Fully-extended boom | kN.m | 1113 | |
Outrigger span | Longitudinal | m | 6.1 |
Lateral | m | 7.1 | |
Hoist height | Base boom | m | 11.3 |
Fully-extended boom | m | 43.6 | |
Boom length | Base boom | m | 11.5 |
Fully-extended boom | m | 44 | |
Jib offset angle | ° | 0,15, 30 | |
Boom raising time | s | ≤40 | |
Boom fully extending time | s | ≤90 | |
Hoistin Hoisting speed (single line, 4th layer, no load) | Main winch | m/min | ≥130 |
