WMR-C-451
12 Months
Car, SUV, Agricultural Vehicles, Engineering Vehicles, Sightseeing Car, RV, Forklift, Corn Machine
Stainless Steel
Reverse Image
RCA
Night Vision, Waterproof, Dustproof, Shockproof
420TVL
CMOS
IP68
Wemaer
Neutral Box
CE
China
8525801390
Product Description
1.Product Features:
1)Original fitting by replacing the shelf of license light or Universal installation
2)Smart size for hidden installation.
3)1/3"CCD
4)Lens: 170 degrees
5)Waterproof and dust-proof (IP68) CCD camera
6)With car reversing reference line(optional)CCD camera.
7)License light available on partial models.
8)Night vision available and high definition CCD camera.
9)Day /Night sensor for automatic adjustment, minimum illumination auto fill light.
2.Installation Guides:
1)Get out the license light;
2)Get the rear view lens lines across the license light original position;
3)Fasten the camera with the buckle which place in the two sides of the camera;
4)Connect the lens built-in license light power lines to the original license light power lines;
5)Connect the reverse lens switching lines;
6)Connect the camera's signal line to the signal extension line;
7)Connect the car's reverse light line to camera's video cable;
8)Check if all lines are correct connected and arranged;
9)Debug the working effects of the camera and the license light;
10)Cover the car trunk. Finished.
3.Accessories:
1.)General wire and power wire
2.).User Manual
5.Suite and cable instruction
WIRE
1.Universal wire: 6m video extention wire
and 1.2m power extention wire
A Display screen
B.Camera
C.Video extention wire
1)Original fitting by replacing the shelf of license light or Universal installation
2)Smart size for hidden installation.
3)1/3"CCD
4)Lens: 170 degrees
5)Waterproof and dust-proof (IP68) CCD camera
6)With car reversing reference line(optional)CCD camera.
7)License light available on partial models.
8)Night vision available and high definition CCD camera.
9)Day /Night sensor for automatic adjustment, minimum illumination auto fill light.
2.Installation Guides:
1)Get out the license light;
2)Get the rear view lens lines across the license light original position;
3)Fasten the camera with the buckle which place in the two sides of the camera;
4)Connect the lens built-in license light power lines to the original license light power lines;
5)Connect the reverse lens switching lines;
6)Connect the camera's signal line to the signal extension line;
7)Connect the car's reverse light line to camera's video cable;
8)Check if all lines are correct connected and arranged;
9)Debug the working effects of the camera and the license light;
10)Cover the car trunk. Finished.
3.Accessories:
1.)General wire and power wire
2.).User Manual
| Technical Parameters: |
| Image Sensor 1/4 " CMOS PC1030 |
| NSTC/TV System NTSC/PAL |
| Sync System internal |
| Minimum illumination < 1 lux |
| White balance Auto |
| IR LEDs No |
| Video color Colorful |
| Waterproof class IP68 |
| Effective pixels 580(H)*540(V) |
| Resolution 420 TV lines |
| Sensing area 3.5964*2.7084mm |
| Video output 1.0Vp-p, 75Ω |
| Electronic shutter 1/60S-1/5000S |
| S/N ratio Better than 48dB |
| Lens angle 170 degree |
| Operation temperature -20° ~+70° |
| Storage temperature -30° ~+80° |
| Warranty 12 months |
5.Suite and cable instruction
WIRE
1.Universal wire: 6m video extention wire
and 1.2m power extention wire
A Display screen
B.Camera
C.Video extention wire
