16kVA 20kVA 40KVA 521KVA Super Silent Diesel Generator Portable Diesel Generators marine use generator set
| Engine model | manufacturer | Emission Standards | |||||||||||||||||||||||||
| CM6D28F.350 30 | Anhui HUA ling Automobile Co., Ltd. Engine Branch | Off-road three-stage GB20891-2014 | |||||||||||||||||||||||||
| Engine performance curve | |||||||||||||||||||||||||||
| Displacement: 11.81L Power: 350KW Bore: 128mm Stroke: 153mm Compression ratio: 17:1 Speed: 1500@50Hz Inhalation method: supercharged, air-to-air cooling Fuel system: high pressure common rail (1600bar) Engine type: in-line, six-cylinder, four-stroke |
| ||||||||||||||||||||||||||
| Engine model | manufacturer | Emission Standards | |
| CM6D28F.350 30 | Anhui HUA ling Automobile Co., Ltd. Engine Branch | Off-road three-stage GB20891-2014 | |
| Main technical parameters of the engine | |||
| Machine data | |||
| Type | In-line,six-cylinder,four-valve, four-stroke | ||
| Intake mode | Supercharging, air-to-air cooling | ||
| Bore X Stroke | 128mmX153mm | ||
| Displacement | 11.81L | ||
| Compression ratio | 17:1 | ||
| Ignition sequence | 1-5-3-6-2-4 | ||
| Cylinder center distance | 162mm | ||
| Combustion chamber type | ω type | ||
| Engine Dimensions (L X W X H) | 2052x1003x1557mm | ||
| Engine weight (including flywheel, excluding generator) | 1065kg | ||
| Flywheel moment of inertia | 2.9kgm2 | ||
| Intake and exhaust system | |||
| Rated point exhaust back pressure | 15KPa | ||
| Exhaust gas temperature | 563ºC | ||
| Exhaust flow | 1873Kg/h | ||
| Intake flow | 1804Kg/h | ||
| Maximum allowable air intake resistance (clean filter element) | 3.5KPa | ||
| Maximum allowable air intake resistance (dirty filter element) | 6.5KPa | ||
| Intake resistance alarm value | 6.3KPa | ||
| Cooling system | |||
| Main content of coolant | 50:50 (ethylene glycol: water) | ||
| Coolant outlet water temperature | 95ºC | ||
| Coolant inlet and outlet temperature difference | 5.53ºC | ||
| Heat dissipation of the radiator | 124KW | ||
| Radiator flow | 373L/min | ||
| Alarm temperature | 104ºC | ||
| Intake type | air-to-air cooling | ||
| Inter cooler allowable pressure drop | 11-13KPa | ||
| Inter cooler heat dissipation | 48.5KW | ||
| Allowable intake air temperature of inter cooler | 190ºC | ||
| Inter cooler maximum air intake | 1495Kg/h | ||
| Engine model | manufacturer | Emission Standards | |
| CM6D28F.350 30 | Anhui HUA ling Automobile Co., Ltd. Engine Branch | Off-road three-stage GB20891-2014 | |
| Main technical parameters of the engine | |||
| Lubrication system | |||
| Oil pressure@idle speed | 165KPa | ||
| Oil pressure @ rated point | 500KPa | ||
| Maximum allowable oil temperature | 130ºC | ||
| Oil pan capacity low | 30L | ||
| Oil pan capacity high | 38L | ||
| Total system capacity | 41.6L | ||
| Oil pan allowable tilt @ forward tilt | 30° | ||
| Oil pan allowable inclination @ backward | 30° | ||
| Oil pan allowable inclination @ fuel pump side elevation | 30° | ||
| Fuel System | |||
| Pump oil system type | High pressure common rail | ||
| Injector injection pressure | 1600bar | ||
| Fuel temperature | 38±5ºC | ||
| Maximum allowable resistance of fuel pump inlet pipe (clean filter element) | 10KPa | ||
| Maximum allowable resistance of fuel pump inlet pipe (dirty filter element) | 24.7KPa | ||
| Electronic control start system | |||
| Standard starter starting voltage | 24V | ||
| Minimum average starting speed at unassisted cold start | 130r/min | ||
| Minimum temperature at unassisted cold start | -15ºC | ||
| All data is based on: -- Obtained when the engine is running with the fuel system, water pump, oil pump, fan and filter; but does not include the alternator, optional equipment and driven parts. --The engine operation and use conform to the non-road three-stage (GB20891-2014) standard. --Standard reference conditions: atmospheric pressure 100kPa, intake air temperature 25°, relative humidity 50%. The data is within a +/- 4% deviation range. --Altitude, temperature correction: The engine can run under the following conditions: 1500r/min below 3000m, below 40ºC without correction. | |||
Q1,Are you a factory or trading company?
A: We are a factory integrating research, development, production and sales.
Q2,What is your terms of payment?
A: T/T 30% as deposit, and 70% before delivery. We'll show you the photos of the products and packages before you pay the balance.
Q3,How about your delivery time?
A: Generally, it will take 7 to 10 days after receiving your advance payment. The specific delivery time depends on the items and
the quantity of your order.
Q4,How can I get the new price of a product?
A:Please provide the exact or approximate quantity, packing details, destination port or special requirements, so we could give
you the price accordingly.
Q5, How do you make a price offer and how long is its validity?
A:We usually quote within 24 hours by email after we get your inquiry .If you are very urgent to get the price,please call us or
tell us in your email so that we will regard your inquiry priority. The price valid with 30 days.
Q6,Do you accept small order or Sample order?
A:Yes, we do. If you need the samples, we can send free sample to you, you only need to pay for the freight when it arrive(
Freight collect ).
Q7,Do you accept third party inspection?
A:Yes, we do.
Q8,Do you test all your goods before delivery?
A:Yes, we have 100% test before delivery
Q9, How do you make our business long-term and good relationship?
A: 1. We keep good quality and competitive price to ensure our customers benefit ;
2. We respect every customer as our friend and we sincerely do business and make friends with them, no matter
