Share Categories Channel

1/5
Bias Patch Universal Tire Repair Cold Rubber Patch for Vhicle image 1Bias Patch Universal Tire Repair Cold Rubber Patch for Vhicle image 2

Bias Patch Universal Tire Repair Cold Rubber Patch for Vhicle

Ningbo Hopson Chemical Industry Co., Ltd.

Price $0.20 / Pieces
Mini Order
-+Subtotal: $2
Availability In Stock
Purchase details

Payments:

Returns&Refunds:

Eligible for returns and refunds View More

UP-S45
Standard
ISO, CE, RoHS
Portable
New
by Email
24hours
1 Year
Universal Tyre Repair Patch
Cold Rubber Patch
Rubber
Us Style
45×45mm
Square
30days Once Order Is Confirmed
HOPSON TYRE REPAIR
60PCS/Box, 36boxes/CTN; Standard Export Packaging
45× 45mm
Ningbo, China
Product Description

Description

 

HOPSON Universal repair units are rubber-reinforced repairs that can be applied in any repairable area of a radial or bias ply tire; They can also be used for tube repairing.

 



General Info.

 

Part No.: UP-S45

Specification: 45×45mm, Square

Packing: 60pcs/box, 36box/CTN

Sample: available as customers' request
 

Part No.Size(mm)DescriptionBox Qty
(pcs/box)
CTN Qty
(box)
UP-S4545×45Square 6036
UP-S5555×55Square 4036
UP-R6565Round3036
UP-R7575Round5036

 

Selling Points

 

1. Designed for use in radial and bias ply tires

2. Rubber-reinforced; US style

3. Non-directional, center over injury repair units.

4. Permanent, reliable repair.

5. Perfect for nail hole repairs in passenger and light truck tires.

6. Designed for chemical vulcanization.

7. Gray vulcanizing gum, blue poly backing.

 

Quality Guaranteed

 

Excellent quality, similar to Rema Tip Top and Tech; Samples can be sent for customer's testing and evaluation

 

 

INSTRUCTIONS

 

Repairing a tire using a tire patch is a simple process that can be done with just a few tools. Here are the basic steps:

  1. Locate the puncture: The first step in repairing a tire is to locate the puncture. You can do this by inspecting the tread for any signs of damage or by listening for air hissing out of the tire.

  2. Remove the tire: Once you have located the puncture, remove the tire from the wheel using a tire iron. Be sure to loosen all of the lug nuts before raising the car with a jack.

  3. Clean the area: Use a wire brush or sandpaper to clean the area around the puncture. This will ensure that the patch adheres properly.

  4. Apply the patch: Apply the patch over the puncture, making sure that it covers the entire damaged area. Press down firmly on the patch to ensure a good seal.

  5. Reinflate the tire: Reinflate the tire to the recommended pressure using a tire inflator. Check the pressure with a tire gauge to make sure it is correct.

  6. Check for leaks: Finally, check for any leaks using soapy water. If you see bubbles forming around the patch, there may be a leak and you may need to reapply the patch or replace the tire.

It's important to note that tire patches are only a temporary fix and should not be used as a long-term solution. If you have a punctured tire, it's best to get it professionally repaired or replaced as soon as possible.
 

Don't miss the opportunity to check out our full range of tire repair products. 

HOPSON TYRE REPAIR will always surprise you! 
 

 
Company Profile

Ningbo Hopson Chemical Industry Limited is a specialized glue adhesives manufactory. 

We have passed American ASTM Standard, European EN71 Standard, SGS Certificate, and Quality Management System ISO9001:2000. 

We are mainly producing cyanoacrylate adhesives, nail glues, eyelash glues, epoxy resin glues, tire repair cements, and other adhesives. We have more than ten years of experience in the research and development of high-property adhesives. 

Our products are focused on environmental protection and high quality. We are able to provide products that meet your strict requirements.



Exhibition

NINGBO HOPSON CHEMICAL INDUSTRY CO., LTD. attends exhibitions each year in the US, Germany, Dubai, Arab, India, Shanghai, etc. 

Many regular and new customers visited us, and take interested in our products. You can always find something new and different at
our booth.

Our professional sales and technical team will be there offering our best service for you.

 


FAQ

Q: Are you a trading company or manufacturer?
A: We are a manufacturer and also a trading company, so we can provide both good prices and excellent service.

Q: Can I use our own LOGO?
A: Yes, if the customer wants a large quantity, we can use the customer's design.

Q: Do you provide samples? Is it free or extra?
A: Yes, the sample is free if it is in stock, but the customer will pay for the freight.

Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock, or the delivery time is 20-30 days.

Q: MOQ?
A: Different products are different, we welcome the negotiation.

Q: What about your customer service after sales?
A: Generally, we have 2 years quality guarantee, except for some special products.

 

 



Send Message

Content*

Your Name

Tel*

Email*

Shop Cart