ZOOMLION RT75 75 Ton Hydraulic Control Truck Rough Terrain Crane
Feature
1. Fullwheel drive, large ground clearance and strong offroad performance. It is suitable for off-road travel.
2. Complete-extension, half-extension and complete-retraction outrigger operation, no-outrigger operation and driving with load.
3. Fullwheel steering, short wheel base, small turning radius, strong maneuverability; it is applicable to driving and operation in a narrow field.
4. The cab and operating room are integrated into one. Comprehensive lifting operation increases lifting capacity of the front.
5.The utilization of network node control technique can realize intelligent fault diagnosis, facilitate the troubleshooting for the electrical system of the complete vehicle and improve the maintainability of the electrical system.
Parameters
| Item | Unit | Value | |
|---|---|---|---|
| Work performance | Max. rated lift capacity × work radius | kg.m | 75000×3.0 |
| Max. load moment of basic boom | kN.m | 2814 | |
| Max. load moment of fully extended main boom | kN.m | 1184 | |
| Max. lift height of fully extended main boom | m | 41 | |
| Max. lift height of jib | m | 56.8 | |
| Dimensions | Overall dimensions(L×W×H) | mm | 14897×3395×3840 |
| Outrigger spread (L×W) | mm | 7380×1300 | |
| Main boom length (Fully retracted fully extended) | mm | 12500-38500 | |
| Jib length (Jib section 1,jib sections 1+2) | mm | 10000-170000 | |
| Boom angle | ° | -3 - 78 | |
| Swing range | ° | 360°unlimited swing (Full range) | |
| Work Speeds | Max. hoist rope speed (Main winch) | m/min | 125 |
| Min. boom extend time | s | 110 | |
| Min. boom retract time | s | 90 | |
| Min. boom derrick up time | s | 80 | |
| Min. boom derrick down time | s | 70 | |
| Swing speed | r/min | 0-2 | |
| Hydraulic system | Rated work pressure | MPa | 29 |
| Rated work oil flow | L/min | 320 | |
| Hydraulic oil tank capacity | L | 1000 | |
| Mass | Complete vehicle mass | kg | 52840 |
| Front axle load | kg | 27760 | |
| Rear axle load | kg | 25080 | |
| Travel | Max. travel speed (Forwarsd / backwards) | km/h | 36/36 |
| Wheelbase | mm | 4150 | |
| Treads (Front / rear) | mm | 2632 |
Picture
Our company
Newindu Construction Engineering (Shanghai) Co., Ltd. is professional in construction machinery for nearly 10 years, exporting with good quality and low price, having excavator, truck crane, bulldozer, wheel loader, motor grader, drilling rig, dump truck, road roller, forklift, reach stacker, and also including the spare parts, etc.
