DPF cleaning machine is the industry's first - intelligent version of post-processing regeneration equipment:
No cutting - (all types of DOC, DPF, SCR do not need to be decomposed to achieve non-destructive high-temperature regeneration; disassembled DPF can be quickly regenerated through special fixtures; some models can be directly regenerated on the car)
No pollution - (with a thermal mutual anti-warm water cooler to cool and collect the exhaust heat and carbon ash)
Short time - (During regeneration, it is heated directly from the core part, no need to pass through the insulation layer to heat from the outside to the inside, the total time is shortened from the original 5-10 hours to 40 minutes, and the cooling mode is automatically turned on after the regeneration is completed, and the cooling time is changed from the original 2 hours to 5 minutes)
Full-featured - (The device has its own back pressure detection function and is equipped with a data printer. The back pressure detection of the exhaust pipe can be performed before and after regeneration. After the detection is completed, the back pressure data is automatically printed, and the real-time back pressure can be seen during the regeneration process. After the regeneration is completed Automatically print temperature and time data, and generate test reports)
Good effect - (the high temperature and high pressure purge mode is automatically activated during the regeneration process, and the carbon deposits are not retained. After the high temperature regeneration is completed, the carbon deposits are completely discharged through the blast mode!)
