AA-SENSROT-120
Plastic
ISO10012, BSCI, GMP, GSV, ISO13485, OHSAS18001, ISO14001, ISO/TS16949, ISO9001
Volkswagen, WuLing, Benz, BMW, Hyundai, Honda, Toyota, Jeep, Nissan, Ford, Buick, Chevrolet, Cadillac, Geely, Roewe, Audi, Peugeot, Lexus, Volvo, Mazda, Kia
Front
Yes
Buffer for Suspension
VPC Pneumatic
Inner Box, Outer Carton...Pallet
CE, ROHS, SGS
China
8481804090
Product Description
Air Ride Suspension Manifold Valve 1/2"npt Fast Air Bag Control fbss 250psi Max
Compatibility:
AccuAir e-Level Ride Height Sensor & Plastic Arm
No Linkage Or Hardware
AccuAir Ride Height Sensor & Plastic Arm Only
OEM#:
AA-SENSROT-120
| Item SpecSifics | |
|---|---|
| Condition : | New |
| Manufacturer Part Number : | AA-ROT-120 |
| Brand : | Unbranded |
| Other Part Number : | AI-AA-ROT-120 |
| Included Hardware : | Mounting Hardware |
| Interchange Part Number : | e-level plastic arm replacement lowrider |
| Fitment Type : | Direct Replacement |
| FIT : | AccuAir |
Air Ride Suspension Manifold Valve 1/2"npt Fast Air Bag Control fbss 250psi Max
"V2" Manifold Air Valve
Two Dedicated 1/2"npt Inputs for Maximum Air Supply
No Tee Fittings Needed To Run Analog Or Digital Gauges
No Tee Fittings Needed Between Inflate And Deflate Valve
Using Less Fittings Means Quickest Response Times And Fewer Places To Leak
Controls 4 Bags Independently
Includes Dedicated Air Gauge Ports
12 Volt
250 PSI Max
16MM (5/8") Orifice With 1/2"npt Threads
DC12V Solenoid Valve Manifold for Air Ride Suspension
Specifications
1. Factory Direct
2. Pre-wired with fittings
3. Using the import Deutsch & Molex connector.
4. Inflates and deflates up to (4) individual Air Springs
5. Good replacement to Accuair AA-VU4 Air suspension valve block and Robbion Type solenoid valve
"V2" Manifold Air Valve
Two Dedicated 1/2"npt Inputs for Maximum Air Supply
No Tee Fittings Needed To Run Analog Or Digital Gauges
No Tee Fittings Needed Between Inflate And Deflate Valve
Using Less Fittings Means Quickest Response Times And Fewer Places To Leak
Controls 4 Bags Independently
Includes Dedicated Air Gauge Ports
12 Volt
250 PSI Max
16MM (5/8") Orifice With 1/2"npt Threads
DC12V Solenoid Valve Manifold for Air Ride Suspension
Specifications
1. Factory Direct
2. Pre-wired with fittings
3. Using the import Deutsch & Molex connector.
4. Inflates and deflates up to (4) individual Air Springs
5. Good replacement to Accuair AA-VU4 Air suspension valve block and Robbion Type solenoid valve
| Technical Specifications: | |
| Compatible Suspension Type | 4-Corner Full Air Suspension |
| Voltage Requirements | 10.5-16 Volts |
| Current Requirements | 1.1 Amps (for each of the (8) Valves) |
| Connectors | IP67 certified (immersion up to 3 ft) |
| Fitting Size | 3/8"NPT (x 8), 1/4" NPT (x 4) |
| No. of Inlet Ports | 2 |
| No. of Exhaust Ports | 2 |
| Max Operating Pressure | 200 psi |
| Cv Flow Factor | 0.33 |
| Average Adjustment Time | 2.2 Seconds |
AccuAir e-Level Ride Height Sensor & airmaxxx Billet Aluminum Arm
No Linkage Or Hardware
AccuAir e-Level Ride Height Sensor & Plastic Arm
No Linkage Or Hardware
AccuAir Ride Height Sensor & Plastic Arm Only
AA-SENSROT-120
