product picture
Product Description
Feature
1.This multifunctional hand-push weeding machine is different from the traditional side-mounted type. It is hand-pushed, and the head of the mower can be replaced,which can be replaced
by a matching rotary wheel, and a machine has multiple functions.
2.Easy to use, economical and practical.
Product name | Multifunctional hand push lawn mower |
Engine type | Cold air two stroke (single cylinder gasoline engine) |
Engine power | 1.9kw/7000r/min |
Engine displacement | 49cc |
Carburator | diaphragm type |
Fuel ratio | 25:1 |
Engine idle speed | 2800 - 3200 r / min 8 |
Fuel tank capacity | 1.2L |
Working rod diameter | 28mm |
Engine net weight | 4kg |
Gross weight | 16.5kg |
Net weight | 14.5kg |
Dimensions | 1850x520x400mm |
For more details, please contact us on the right
Matters needing attention in two-stroke mower
1.The ratio of gasoline to oil is 25: 1, and the oil uses two strokes of oil. The oil is much more,
and it will emit a lot of blue smoke. Normally, it is a little blue smoke.
2.The air filter is cleaned once a day.
3.Work for half an hour. Take a break, five to ten minutes is enough.
4.The engine had better not stand on its head, because after the fall. Carburetor may leak.
2 stroke mower maintenance,engine can not start.
1.Spark plug broken, for a spark plug, it may be more oil. Just let the spark plug burn .
2.Carburetor block, there are two possibilities, the air filter has a lot of dust, dust into the
carburetor, blocked, another possibility, gasoline is not clean. Block the carburetor, clean
the carburetor or replace the carburetor.
3.When starting the engine, the throttle is very large, pulling a lot of down, not starting, so
that a lot of oil, into the cylinder. Call the flooded tank. Open the spark plug, pull dozens of
times, and drain the oil.
company information
For more details, please contact us in the below
