Share Categories Channel

1/5
Ss Material Side Mounted Tuning Fork Level Switch image 1Ss Material Side Mounted Tuning Fork Level Switch image 2

Ss Material Side Mounted Tuning Fork Level Switch

Hebei Xukang Meter Manufacturing Co., Ltd.

Price $300.00 / Piece
Mini Order
-+Subtotal: $3000
Availability In Stock
Purchase details

Payments:

Returns&Refunds:

Eligible for returns and refunds View More

XK-300
Submersible
Contact
Switching Type
Normal Wirewound
Corrosion Resistant
Stainless Steel
IP65
ISO
Customized
<2MPa
-20-300ºC
Flange ,Thread
Customized
Nc, No ,Spdt
24VDC/220VAC
IP65
up to 4MPa
Aluminum
M20*1.5 & Customized
Solid and Liquid
U-ideal
Wooden Case or Carton
220VAV/24VDC
Tianjin, China
90261000
Product Description
Product Description

     Tuning fork level switch for solid, vibrating rod level switch Tuning Fork Switch vibrates to tuning fork by piezoelectric crystal and inherent frequency of tuning fork.It can monitor continuously to the change of frequency.

     When the tuning fork switch is used for low alarm (or low position control), the medium in the vessel is discharged downward passing through the tuning fork.
     When it is lower than the specific location and change the inherent frequency, this change is detected by electronic component, the output state is shifted; when it is used for high alarm (or high position control), the medium in the vessel go upward and contact with tuning fork which can shift the output state. changes, these changes are detected by the intelligent circuit, and converts it into a switch signal.

Tuning fork level switch Application:
     Whatever feed,mud and drike or pulp,glue and dye.the level switch is suitable
     Water, mineral water
     Waste water, sewage, slurry, acid alkali solution
     Beer, beer starter culture, juice, beverage
     Paper pule, glue,dye,solid power and other similar good mobility materials
     Diesel and other similar dangerous liquids/ hazardous conditions

Features:
      High adaptation: no influence on electrical parameter and density of medium, suitable for various conditions. Scaling ,stir, turbulent flow, bubble ,vibration, middle viscosity, high pressure, high temperature etc.
     No calibration: no need for calibration on spot since no impact on electrical parameter and density of medium
Maintenance-free: no moving parts, no need to maintain after installation.
     Various Power supply: he vibrating fork level switch is 20~250VAC, 20~60VDC,Suitable for all Power supply place.
     Various Connection: The level switch with flange and thread connection for you reference. 
Product Parameters
 
medium temperature -20ºC-150ºC
mesured medium liquid, powder or granular solid
measured medium density solid≥0.1g/cm3
liquid≥0.7g/cm3
measurd solid particle size ≤10mm
Maximum liquid viscosity:<1000mm2 /s
Connectionmethod
G1",thread:G3/4,thread:1"NPT
Forkbodymaterial:
SS304,SS316 stainlesssteel,PTFE
Enclosureprotection class 
IP65
Power supply voltage
DC24V:AC220V 50HZ
electricalinter face
M20*1.5
0utput signal
relayoutput:8A220VAC;8A24VDC
 
Company Profile

Certifications

Packaging & Shipping

Send Message

Content*

Your Name

Tel*

Email*

Shop Cart