SMA4DC-B
Column Cylinder Type
Resistance Strain
Two Wire System
4-20mA
SemiConductor
Integration
Stainless Steel
IP67
CE
Customized
Sun-Moon
Export
220mm*220mm*320mm
China
9031809090
Product Description
Description:
Wired load sensor, is a load sensor with high anti-interference performance. The product adopts standard current 4-20mA signal output and full sealing design, can work in high temperature, high cold, high humidity, high radiation and other harsh environment, is widely used in the pump work diagram measurement system.
Characteristics :
After more than ten years of use in oil production plants, it has been continuously improved.
Fully sealed waterproof design to meet all-weather use;
Easy and safe operation;
Standard 4-20mA two-wire output
Power supply is indiscriminate between positive and negative poles
Dimensions (In mm. 1mm=0.03937 inches)
Specification:
Wired load sensor, is a load sensor with high anti-interference performance. The product adopts standard current 4-20mA signal output and full sealing design, can work in high temperature, high cold, high humidity, high radiation and other harsh environment, is widely used in the pump work diagram measurement system.
Characteristics :
After more than ten years of use in oil production plants, it has been continuously improved.
Fully sealed waterproof design to meet all-weather use;
Easy and safe operation;
Standard 4-20mA two-wire output
Power supply is indiscriminate between positive and negative poles
Dimensions (In mm. 1mm=0.03937 inches)
Specification:
| Type | Technical parameters |
Nominal load range | 0~150 KN |
output | 4-20mA |
Class precision | 0.5%FS |
Insulation Resistance | ≥5000MΩ |
Zero Balance | ≤0.1%FS |
| Power supply | 15~24 VDC |
Effect of temperature | 0.5%FS/10ºC |
temperature compensation | -10~65ºC |
| Operating temperature | -40~+85ºC |
| Safe Load Limit | 150% FS |
| Safety margin against yielding | 300% FS |
Material material | High performance alloy steel or (chromium ratio>15% stainless steel) |
| Protection type | IP68 (IEC60529) |
