and long service life, stable and reliable, and convenient to install and maintain, and is
applicable to various fields of acid, alkali, salt, anticorrosion, and high temperature.
The meter is with following features:
For circuit design, high-quality power modules are selected to be as power supply parts
and highly stable and reliably imported devices are used as components of the meter. It
can fully replace imported foreign meters of the same type.
Patent sonic-wave intelligent technology software can make intelligentized echo analysis.
It needs neither debugging nor other special steps. This technology has functions of
dynamic thinking and dynamic analysis.
Our sonic-wave intelligent patent technology greatly improves the meter's precision, and
the precision of liquid level is up to 0.3%, which is enough to resist various interference
waves.
The meter is a non-contact one and does not directly contact liquid, so the fault rate is low.
The meter can be installed in several different ways, and the user can make meter
calibration according to the Manual.
The meter's all input and output lines must be with such protection functions as lightning
protection and short circuit prevention.
Measuring range: 0~20m(Chosen based on actual measuring range)
Blind area: 0.25m~0.6m
Ranging accuracy: 0.3%(Standard condition)
Ranging resolution: 1mm
Pressure: Less than two atmospheric pressure
Meter display: With LCD to display liquid levels.
Analog output: 4~20mA
Digital output: RS485, Agreement Modbus or customization agreement
Power supply voltage: DC24V/AC220V, lightningproof device installed insideAmbient
temperature: -20ºC ~ +60ºC
Protection grade: IP65
| Blind area | Standard: 300mm | 350mm | 500mm | 500mm | 600mm | 800mm |
| OEM:200mm | ||||||
| Power supply | Standard: DC24V | DC24V | DC24V | DC24V | DC24V | DC24V |
| OEM:DC12V, AC220V | / | OEM:DC12V, AC220V | / | |||
| Beam angle | 15° | 12° | 9° | |||
| Operating frequency | 38K±10Khz | 55K±10Khz | 40K±5Khz | |||
| Accuracy | Standard: ±0.5%F S or ±5mm; (at 25ºC, Absolutely flat target under the condition of standard) | |||||
| OEM: FS≤1m, accuracy can be ±1mm FS≤2m, accuracy can be ±3mm FS≤15m, accuracy can be ±0.25% FS | ||||||
| Output signal | Standard: 4-20mA (3 wires) | |||||
| OEM: 4-20mA(4 wires), 0-20mA, 0-5v, 1-5v 0-10v, 1-10v (both signal can not be customized DC12v) RS485(MCU protocol as default, Address=01, bps=9600) 4-20mA+RS485; 1-5V+RS485, 1~2NPN 1-10V, 0-10V, 4-20mA(two wire) - Power supply 24VDC can not be OEM | ||||||
| Measuring mode | Standard: Distance mode, the distance of ultrasonic sensor surface to measuring target surface | |||||
| OEM: Level mode; the distance of level surface to level bottom(the bottom of tank) NOTE: Ensuring the distance of sensor surface to the level bottom is the actual mounting height, otherwise might be have installation error. | ||||||
| Working temp. | Standard: 0~50ºC | |||||
| OEM: Negative Temp. -10ºC,-20ºC,-30ºC; Positive Temp. 60ºC,70ºC,80ºC | ||||||
| Wiring Mode | Quick connect type terminal(can be customized cable outlet about 1m) | |||||
| Installation | Screw type or sifter clamping ; screw size: M68*2.0mm | |||||
| Protection class | IP65, OEM of IP66, IP67, IP68 | |||||
| Working environment | Normal pressure, non-explosion-proof; non-corrosive environment | |||||
| OEM: Anti-explosion symbol Exia II AT3 (DC12 V,range≤10m ) The material sensor housing: PTFE for large power sensor Strong in corrosion resistance | ||||||
1:What detailed information do I need to provide if I want to place an order?
Application,measured medium,work temp.,test range,output,screw port,electrical connection etc.
2:How long will get the reply?
Contact you in 6 hours during working days or talk online through TradeManager,Skype,Wechat.
3:Could I get samples?
Any quantity samples are available for you to test our quality.
4:Could you provide me the shortest lead time?
We have materials in stock,we will put your order ahead of schedule if need in rush.
5:Could I visit your factory?
Of course,we warmly welcome you to visit our factory.
6:What's the terms of payment?
Paypal or Western Union for samples,TT for bulk order.
7:How could you control the quality?
100% incoming quality control for materials,process inspection when produce,and then do long-term test for temperature compensation,aging test,long-term stability performance etc if need,and then final inspection before leaving the factory.
8:Can we use our logo on the products?
Yes,we can provide OEM/ODM service and make your laser logo.
9:What's the means of transport?
DHL/FEDEX/UPS/EMS/TNT/China Post/Sea etc. Freight prepaid or Freight collect.
