Model NO.:

HM1550

Type:

Piezoresistive Pressure Sensor

Component:

SemiConductor Type

For:

Diffused Silicon Pressure Transmitter

Output Signal Type:

Analog Type

Production Process:

Integration

Material:

Water Pump Silicon Piezoresistive Pressure Core Bo

Thread Type:

Gas and Liquid

Wiring Type:

Three-Wire(Customizable)

Measuring Medium:

IATF16949

IP Rating:

IP65

Certification:

Customized:

Customized

Trademark:

FLUHANDY

Transport Package:

Neutral Packing

Specification:

0~20bar (Customizable)

Origin:

China

Product Description

Water pump silicon piezoresistive pressure core body

Standard voltage signal (with NTC), soldered silicone wire/ribbon wire within 400mm.

HM1550 Water pump pressure sensor series of products uses a silicon piezoresistive sensor chip with good consistency and strong stability, and is made through a stainless steel diaphragm isolation and oil-filling process. Water pressure sensor has fast response time, low signal noise, strong anti-interference ability, high reliability, shortcomings, etc. Advantages: It is very suitable for pressure measurement in wall-mounted boilers, water pumps, intelligent fire protection, Water core module variable frequency water supply, air compressors and other fields.Water pump core body Standard voltage signal (with NTC), soldered silicone wire/ribbon cable.

A variety of options are available to meet different needs.
Accurate pressure measurement, high reliability, high stability, high cost performance.
Using dedicated amplifier circuit and excellent temperature compensation technology.
High sensitivity and fast response speed.
CE, ROSH certification.
Product parameters

Work environment
Medium temperature	minimum value -20 ° C	Maximum value 105 ° C
Storage temperature	minimum value -40 ° C	Maximum value 85 ° C
Notes	The measurement medium cannot be frozen
Electrical characteristics
power supply	5 ± 0.25VDC (customizable)	Working current	<5mA
Output voltage (proportional)	0.5-4.5VDC (customizable)	Load resistance	> 2KQ
Working characteristics
measuring range	0~3~20bar (customizable)	Overload pressure	150% FS
Static accuracy	±1.5% @ FS (customizable)	Burst pressure	300% FS
Measurable medium	Non corrosive gases or liquids	Comprehensive error	±3.0% FS (customizable)
Mechanical performance
Protection level	IP65	Pressure interface	/

Boundary dimensions and pin definitions

Output characteristic

Matters needing attention

1,The measuring medium cannot be frozen;

2,During installation, avoid scratching the O-ring seal;

3,Do not use media beyond the prescribed limits;

4,The power supply needs to be filtered to prevent damage to this product caused

by instantaneous high currents;

5,Please do not exceed the specified range of power supply voltage;

6,It is strictly prohibited for cables to bear tension;

7, Avoid falling, hitting, and puncturing hard objects;

8,Avoid product exposure to water and strictly prohibit water immersion;

9,It is strictly prohibited to disassemble the casing to avoid product damage.
Disclaimer

1,Use of media beyond regulations;

2,Exceeding the specified power supply voltage for use;

3,Use beyond the specified temperature range;

4,Use beyond the specified pressure range;

5,Severe deformation or damage to the isolation membrane caused by improper operation;

6,Force majeure, such as product damage caused by lightning strikes, etc;

7,Other product damage caused by failure to use in accordance with the requirements of this specification.

Note: The accuracy of a product refers to the error rate between the theoretical output value (calculated according to the output formula) and the actual measured value.

That is, accuracy=(measured value - theoretical value)/net output

Net output: 4.5-0.5=4

Jiangmen Ever-smart Intelligent Control Instrument Co., LTD. Founded in 2013, covering an area of 1500 square meters, we are an intelligent manufacturing enterprise that integrates product design, research and development, production, and sales. Our core team has been deeply involved in the field of instruments and meters for more than 20 years.
Since its establishment, our company has been deeply involved in the fields of instruments, sensors, testing equipment, and automation control systems. Currently, our products have covered various categories such as pressure sensors, high-precision digital pressure gauges, high-precision detectors, high-precision pressure controllers, and automated production pressure calibration systems, and continue to develop in a series. At present, we have formed an annual production and quality assurance capacity of 1 million pressure sensor products, and are equipped with a professional product research and development team. Our sales channels cover various parts of the country, the Middle East, Europe, the Americas, and Southeast Asia.
The company has always adhered to the principle of "professional creation of high-quality products, sincere realization of win-win", and always adheres to creating maximum value for customers with leading technology.
Looking towards the future, Hengmin Company will continue to advance, driven by technological innovation and guided by market demand, and strive to create more distinctive brands.

Price	$8.25 / Piece
Mini Order	-+Subtotal: $82.5
Availability	In Stock

Purchase details Payments: Returns&Refunds: Eligible for returns and refunds View More

Water Pump Silicon Piezoresistive Pressure Core Body