MRS-LS-100
Contact
Switching Type
IP65
Customized
Liquid, Powder or Granular Solid
Dpdt /Two-Wire System Namur, 8/16m
≦95% Rh
-20ºC~80ºC
± 5 mm
G1, M20*1.5, NPT1/2
Die Cast Aluminum Alloy
Thread, Flange, Chuck, Sanitary Loose Chuck
XYT
Carton
1KG
China
9026201090
Product Description
Overview
This product is designed based on the principle of tuning fork, which vibrate uses inherent frequency of piezoelectric crystals. And also, it can continuously monitored as for this frequency changes.
When it used for low alarm use, the liquid in the container tends to the lower discharge flows through the tuning fork, causing the natural frequency change that is detected by electronic components ,while switching output state.
When use for high alarm, the liquid inside the container rises and connects with the tuning fork can also be switched to the output state.
The natural frequency of the tuning fork (1000Hz), in order to prevent interference from the vibration of the equipment itself, which may cause the wrong switching action of the tuning fork, the length of the tuning fork is short, so that the length of the extension into the container or pipe is minimized.
Extensive research has led to the tuning fork design to achieve the highest operating frequency, thus make the product suitable for all liquid packages, includes coating solution (eliminate tuning fork bonding), aerated liquid and slurry.
Feature
a.The instrument adopts various chips with high performance, high speed and high reliability to optimize
signal acquisition, algorithm and mechanical structure. Thereby, the response speed, function and reliability of the product are improved.
b.The instrument can switch the alarm mode according to the demand. Sensitivity is custom adjusted according to material and site requirements.
c.According to the on-site use environment, products with high protection, explosion-proof, high temperature and high pressure resistance can be provided.
d.In addition, there are various options for the power supply mode, connection mode, and wetted
material of the product for users to match.
Parameter
Dimensions
Wiring diagram
Company Profile
Packaging&Shipment
1. How long will you reply to me?
Normally in 1 hours, no more than 12 hours.
2. How can I get the quotation?
Please provide specification and application including sensing element, pressure range, thread connection, pressure type, medium, electronic connection, shell material etc. More details, more accurate quotation and earlier response.
3. Can I get sample?
Contact with our staff online directly and they would check stock for you.
4. Can I visit your factory?
You are warmly welcomed, our factory is located at Baoji city, Shaanxi province, China.
5. Can we use our logo on the products?
Yes, we provide OEM/ODM service.
6. How long is your warranty period?
Warranty period from the date of acceptance of 12 months.
7. What is your terms of payment?
We could accept T/T, L/C, Western union, PayPal, credit Assurance.
This product is designed based on the principle of tuning fork, which vibrate uses inherent frequency of piezoelectric crystals. And also, it can continuously monitored as for this frequency changes.
When it used for low alarm use, the liquid in the container tends to the lower discharge flows through the tuning fork, causing the natural frequency change that is detected by electronic components ,while switching output state.
When use for high alarm, the liquid inside the container rises and connects with the tuning fork can also be switched to the output state.
The natural frequency of the tuning fork (1000Hz), in order to prevent interference from the vibration of the equipment itself, which may cause the wrong switching action of the tuning fork, the length of the tuning fork is short, so that the length of the extension into the container or pipe is minimized.
Extensive research has led to the tuning fork design to achieve the highest operating frequency, thus make the product suitable for all liquid packages, includes coating solution (eliminate tuning fork bonding), aerated liquid and slurry.
Feature
a.The instrument adopts various chips with high performance, high speed and high reliability to optimize
signal acquisition, algorithm and mechanical structure. Thereby, the response speed, function and reliability of the product are improved.
b.The instrument can switch the alarm mode according to the demand. Sensitivity is custom adjusted according to material and site requirements.
c.According to the on-site use environment, products with high protection, explosion-proof, high temperature and high pressure resistance can be provided.
d.In addition, there are various options for the power supply mode, connection mode, and wetted
material of the product for users to match.
Parameter
| Item | Description | |
| Measuring meduim | Liquid | |
| Operating feature | Oscillation frequency | 1000HZ |
| Accuracy | ±2mm | |
| Measuring range | 40-1000mm | |
| Working temperature | -30-80ºC | |
| Repeatability | ±2mm | |
| Display | LED | |
| Electrical feature | Power supply | DC24V |
| Power | 1 W | |
| Output signal | Relay dry contact (DPDT) | |
| Maximum load | 5A | |
| Mechanical characteristics | Working pressure | -98KPa-3MPa |
| Medium temperature | -30-150ºC | |
| Shell material | Aluminum alloy | |
| Sensor material | SS316 | |
| Wetted material | SS304 | |
| Protection level | IP67 | |
| Electrical interface | M20*1.5/G1/2 | |
| Other | Weight | About 0.7kg |
Dimensions
Wiring diagramCompany Profile
Packaging&Shipment
| FAQ |
Normally in 1 hours, no more than 12 hours.
2. How can I get the quotation?
Please provide specification and application including sensing element, pressure range, thread connection, pressure type, medium, electronic connection, shell material etc. More details, more accurate quotation and earlier response.
3. Can I get sample?
Contact with our staff online directly and they would check stock for you.
4. Can I visit your factory?
You are warmly welcomed, our factory is located at Baoji city, Shaanxi province, China.
5. Can we use our logo on the products?
Yes, we provide OEM/ODM service.
6. How long is your warranty period?
Warranty period from the date of acceptance of 12 months.
7. What is your terms of payment?
We could accept T/T, L/C, Western union, PayPal, credit Assurance.
