PPM-S314
Resistance Strain Gauge Pressure Sensors
Mechanical Structure Type
Strain Gauge Pressure Transmitter
Analog Type
Injection
Stainless Steel
M
Four-Wire
Liquid
IP65
CMC
Customized
CSPPM
Standard Package for Exporting
Changsha, China
Product Description
PPM-S314 Pressure Sensor for high temperature application sensor de presión
Description
The model PPM-S314 pressure sensor adopts thin-film sputtering technology. Each sensor was strictly temperature compensated for both zero and span. The PPM-S314 is available with measuring ranges up to 120Mpa and is suitable for oil industrial application. All wetted parts are manufactured from stainless steel and are fully welded. It is easy to install and configure and customized dimensions are accepted.Features
1. Small in size2. High accuracy up to 0.1%FS
3. High stability
4. Resistant to high and low temperature
5. strong anti-overload ability
Applications
1. Oil fields2. Aerospace industry
3. Engine testing
4. Internal combustion engine, diesel engine
5. Applications in harsh areas
Specification
| Measuring medium | Gas, liquid, steam |
| Pressure type | Gauge pressure(G), Sealed pressure(S), Absolute pressure(A) |
| Pressure range | 0~1MPa…10MPa…30MPa…40MPa…60MPa…70MPa…100MPa…120MPa |
| Power supply | 5VDC(3-12VDC) |
| Output signal | 0-10mV, 0-25mV(2mV/V, 5mV/V) |
| Nonlinearity | ≤0.02% FS, ≤0.04% FS, ≤0.05% FS |
| Hysteresis | ≤0.02% FS, ≤0.04% FS, ≤0.05% FS |
| Non-repeatability | ≤0.1% FS |
| Accuracy | 0.1%FS, 0.2%FS |
| Long-term stability | 0.1%FS/year |
| Medium temp | -40~125ºC/150ºC/175ºC/200ºC/250ºC |
| Operation temp | -40~+85ºC |
| Zero temp. drift | ≤0.005%FS/ºC, ≤0.01%FS/ºC |
| FS temp. drift | ≤0.008%FS/ºC, ≤0.015%FS/ºC |
| Response time | ≤1ms(10%~90%) |
| output impedance | 1500±50Ω,3300±50Ω,5500±1500Ω |
| Insulation resistance | ≥500 MΩ/100V |
| Overpressure | 200%FS (2 times FS) |
| Damage pressure | 500%FS (5 times FS) |
| Vibration resistance | 5~1000Hz |
| Shcok resistance | 50g, 20ms |
| Process connections | M10×1, or other process connections on request |
| Sealing method | Double sealing rings, sealing cone, end face sealing |
| Materials | Wetted parts: 17-4PH, 15-5PH Non-wettedparts: stainless steel 316, 1Cr18Ni9Ti |
| Ingress protection | IP65 |
| Electrical connections | Red-Power+, Black-Power-, Green-Output+, White-Output- |
Dimensions in mm
PPM-S314A
PPM-S314B
PPM-S314C
Order information
| Model PPM-S314 Pressure Transmitter | ||||||||||
| Code | Pressure type | |||||||||
| G | Gauge pressure | |||||||||
| S | Sealed pressure | |||||||||
| A | Absolute pressure | |||||||||
| Code | Pressure ranges | |||||||||
| M | 0~ X MPa | |||||||||
| K | 0~ X KPa | |||||||||
| Code | Accuracy | |||||||||
| 1 | ±0.5%FS | |||||||||
| 2 | ±0.25%FS | |||||||||
| 3 | ±0.1%FS | |||||||||
| Code | Output signal | |||||||||
| V0 | mV | |||||||||
| A0 | Others | |||||||||
| Code | Operation temperature | |||||||||
| T1 | -10~70ºC | |||||||||
| T2 | -25~85ºC | |||||||||
| T3 | -30~125ºC | |||||||||
| T4 | -45~150ºC | |||||||||
| T5 | -10~175ºC | |||||||||
| T0 | Others | |||||||||
| Code | Power supply | |||||||||
| D1 | 5VDC | |||||||||
| D0 | Other | |||||||||
| Code | Process connection | |||||||||
| M1 | M20x1.5 | |||||||||
| M2 | M14 x1.5 | |||||||||
| M3 | M10x1 | |||||||||
| G1 | G1/4 | |||||||||
| G2 | G1/2 | |||||||||
| N1 | 1/4NPT | |||||||||
| N2 | 1/2NPT | |||||||||
| F0 | Other | |||||||||
| Code | Electrical connectiong | |||||||||
| W1 | Cable outlet | |||||||||
| W2 | DIN43650 | |||||||||
| W3 | Circular connector M12 x 1 | |||||||||
| Code | Other | |||||||||
| P1 | Commom | |||||||||
| P2 | Non-cavity diaphragm | |||||||||
