FF-401 RGB
Frequency State Modulation
Structural Fiber Optic Sensor
Switching Value
Integration
Functional
Plastic
IP55
ISO
Customized
FC-401RGB
NPN No Nc Adjustable
12-24VDC
Yes, Double Digital Display
Red Light
Universal for Both Diffuse and Through Beam
-10 to +50 Degree
ISO, CE, RoHS
65g
Fiber Optic Sensor
Usually 7 Days After Payment Done
Yes, Customized Available
F&C
Carton
China
8536500000
Product Description
Optical fiber sensor factory color detection fiber optic sensor
Fiber Amplifier Sensor FF-403 compatible fiber units
(Diffuse fiber unit, through-beam fiber unit, array fiber unit ....... )
Fiber Amplifier Sensor Features:
- Dual digital display for timely sensing value (Red) and set value (Green)
-3 types of digital fiber sensor and amplifier available. Standard switching value output, Dual output channel type and analog output type.
- 4 response speeds - Ultra-fast mode (100us), fast mode (300us), standard mode (1ms),
long-distance mode (2ms)
- Display range : 0-9999
- Simple sensitivity adjustment settings
- Mutual interference prevention allows adjacent installation- One key smart teach setting.
- Various LED light sources (red, green, blue) available for diverse applications
-All-purpose usage for both diffuse reflection fiber units and Through-Beam type fiber Units
| Light source | Red | ||||
| Diffuse Sensing (φ1.0 fibre core) | 200mm | ||||
| Thru-beam Sensing (φ1.0 fibre core) | 1000mm | ||||
| Voltage | 12-24VDC ±10% | ||||
| Current Consumption | 40mA below | ||||
| Output | NPN/PNP | NPN Type | PNP Type | ||
| NPN open-collector transistor | PNP open-collector transistor | ||||
| Max current: 100mA | Max current: 100mA | ||||
| Residual Voltage: 1.0V below at 50mA; 0.4V below at 16mA | Residual Voltage: 2.0V below at 100mA; 1.0V below at 16mA | ||||
| NO/NC set | freely adjust of normally open and normally close | ||||
| Circuit protect | short-circuit protection; Reverse polarity protection | ||||
| Digital display | 8 bits LED display, 4 bits Green setting value, 4 bits Red sensing value | ||||
| Sensitivity | Auto/manual Setting | ||||
| Frequency | 1KHz | ||||
| Response time | 150us, 300us, 1ms, 2ms can be set | ||||
| Time Delay | 5s, 0s(standard), 500ms, 50ms, 5ms. 5 types free setting | ||||
| Transmit Power | 4 types, 100%, 50%, 25% ,12% | ||||
| Initial Recovery setting | press " +" and " -" for 3s at the same time to recovery initial status | ||||
| Fast setting | press " teach" for 3s on the basis of fiber sensor install well | ||||
| Ambient temperature | -10 to +50 degree | ||||
| Ambient humidity | 35 to 85% RH | ||||
| Material | Housing : PC+ABS | ||||
| Weight | 65g | ||||
| Accessories | 1*Mounting bracket | ||||
Fiber Amplifier Sensor FF-403 compatible fiber units(Diffuse fiber unit, through-beam fiber unit, array fiber unit ....... )
