2. Model: BST105
3. Material: Stainless Steel
4. Cpacity: -0.1~0~1~150(MPa)
5. Size: Φ8*Φ26.5*116 mm
6. Design:
7. Main Features
(1) Fully Welded Stainless Steel Housing
(2) No Oil Fill, Welds, or Internal O-rings
(3) Wide Operating Temperature
(4) Compatible with Liquids and Gases
(5) Rugged, Compact Design
(6) Pressures up to 10,000 PSI
(7) High Shock and Vibration
8. Technical Datasheet
| Specifications | Technique |
| Capacity | 0~1KPa~10KPa~400KPa~1.6MPa |
| 2wires | 4~20mA |
3wires | 0~5V,1~5V,0~10V | |
| Comprehensive accuracy | 0.1% F.S.,0.2% F.S.,0.5% F.S. |
| Power supply | 24VDC(9~36VDC ) |
| Medium temperature | -20ºC~75ºC |
| Ambient temperature | -20ºC~75ºC |
| Load resistance | Voltage type≥50kΩ Current type≤800kΩ |
| Insulation | ≥2000MΩ/100VDC |
| Respone time | <1ms |
| IP Class | IP65 |
| Long term stalibity | 0.1%F.S./Year |
| Vibration effects | 20~1000HZ<0.1% F.S. Impact is less than 0.1% F.S. |
| Electrical interface | Hirschmann connectors |
| Thead connection | Φ8 fast connector |
| Outline size | Φ8×Φ26.5×116 mm |
| Material | Stainless Steel |
9.Applications:
- Industrial OEM Equipment
- Hydraulic Systems
- HVAC Equipment
- Refrigeration Equipment
- Automotive
- Energy / Water Management
- Test Stands
- Off-Road / Construction Equipment
- Railways (Braking, Compressor & Engine Control
The BST105 is a low pressure Class I Division 2 stainless steel pressure transmitter for use in hazardous areas. In addition to its rugged construction and the best price-to-performance ratio in the industry, the BST105 is the solution for low pressure measurement for a variety of applications.
In this catalog, you could find pressure transducers/transmitters of liquid and gas; Flow meters; displacement sensors; Temperature sensors; Liquid Level Sensor/Meters.
If you need any special requirements, we could make it as customized according to your design.
bransensor.en.made-in-china.com
