HOHAN 4X2
24 Online Service
1 Year
Euro 2
11-20t
Manual
Diesel
10000L
4x2
251-350hp
New
Request Customized
4*2 6 Wheeler
4*2
1 Unit
15 Days
sinotruk
Nude Packing
8030X2540X3300mm
China
8701909000
Product Description
Model | ZZ1167M4611W Driving Type 4×2 | |
Engine | Engine model: WD615.87, Euro 2 emission standard, 4 stroke injection diesel engine, 6 cylinder in-line with water | |
cooling, turbo-charging & inter cooling, mechanical high pressure oil pump system | ||
Maximum output: 290PS (247kW) at 2200 rpm | ||
Maximum torque: 1350Nm at 1100-1600rpm | ||
Bore: 126mm Stroke: 130mm | ||
Displacement: 9.726L | ||
Compression ratio: 17.5:1 | ||
Specific fuel consumption: ≤198g/kWh | ||
Engine oil filling quantity: 23L | ||
Air compressors: WABCO Twin cylinders air compressors; | ||
Cooling system filling quantity(long-term filling): 40L | ||
Clutch | SINOTRUK's 430C diaphragm spring clutch, hydraulically operating with air assistance | |
Transmission | Transmission, model HW19710, 10 forward and 2 reverse | |
Ratio:14.28; 10.62; 7.87; 5.88; 4.38; 3.27; 2.43; 1.80; 1.34; 1.00; 13.91/3.18(R) | ||
Propeller Shaft | Double universal joint propeller shaft with gear-shaped coupling flange | |
Front Axle | New HF9 series, with drum brake system | |
Steering with double T-cross section beam | ||
Rear Axle | HC16 pressed axle housing, single reduction and differential locks between axles; with drum brake system. | |
Ratio:4.42 | ||
Chassis | Frame: High-strength U-profile frame, all cold riveted cross members and reinforced subframe | |
Front suspension: semi-elliptic leaf springs with hydraulic telescopic double-action shock absorbers and stabilizer | ||
Rear suspension: semi-elliptic leaf springs and bogie springs | ||
Spare wheel carrier: with one spare wheel | ||
Steering | ZF8118, hydraulic steering with power assistance | |
Ratio: 22.2-26.2:1 | ||
Braking System | Front and rear drum brake, four-circuit protection valve | |
Service brake: dual circuit compressed air brake | ||
Parking Brake: spring energy, compressed air operating on rear wheels | ||
Auxiliary brake: engine exhaust brake | ||
Wheel & Types | Rims: 8.5-20,10 hole-steel | |
Types: 295/80R22.5, 12.00R22.5, 315/80R22.5, 12.00R20 | ||
Driver's cab | Long cab, all steel forward control, 55° hydraulic tilting to the front, 2-arm windscreen wiper system with 3 speeds,VDO | |
electrical control system, laminate windscreen, with casted-in radio aerial, adjustable driver's seat and rigid adjustable | ||
co-driver's seat, heating & ventilation system, with stereo radio/cassette recorder, one sleeper,sun visor, safety belt, air | ||
conditioner, adjustable steering wheel. | ||
Electrical System | Operating voltage:24V, negative grounded | |
Starter: 24V, 7.5KW | ||
Alternator: 3-phrase, 28V, 1540W | ||
Batteries: 2×12V, 165Ah | ||
Cigar-lighter, horn, headlamp, fog light, brake lights, indicators and reverse lamp | ||
Dimensions in mm | Wheel base (mm) | 4600+1500 |
Front wheel track (mm) | 2022/2041 | |
Rear wheel track (mm) | 1830 | |
Front overhang (mm) | 1500 | |
Rear overhang (mm) | 1859 | |
Approach angle(°) | 19 | |
Departure angle(°) | 24 | |
Overall Dimension (mm) | 8030×2540×3300 | |
Weight in kg | Permissible loading capacity (kg) | 16000 |
Dead weight (kg) | 10500 | |
Gross vehicle weight (kg) | 16000 | |
Gross combination weight (kg) | 16000 | |
Front axle loading capacity (kg) | 9000 | |
Rear axle loading capacity (kg) | 16000 | |
Performance | Maximum driving speed(km/h) | 78(reference data) |
Maximum gradeability (%) | 36 | |
Minimum ground clearance(mm) | 314 | |
Minimum turning radius (m) | 15 | |
Fuel consumption(L/100km) | 40(reference data) | |
sewage suction tank confirmition | capacity: 10cbm | |
tank material: Q235 | ||
tank thikness: tanker 6mm, seal head 6mm | ||
Italy vaccum pump:MEC11000 | ||
Italy vaccum valve:PN100 | ||
The factory and the company are open, and we have received 1,000+ customers frommore than 100 countries around the world. Welcome customers to visit our companyand production factory.
Our trucks are popular in Africa,South Africa,The Middle East,South America,Southeast Asia.We have enough experience to solve any problems you may encounter.We have a professional after-sales team, which will solve your questions in time.
Company brief introduction:
We are established in 2010. The company is located in Jinan City, Shandong Province, where Sinotruk is located.Sincere to the customer and in good faith of quality is Deruna Heavy Truck Parts forever followed motto. It's the basement to be a human and do business. We take all responsibility for our products and service sincerely.
Main product:
Our company specializing in the manufacturing and wholesale of China National Heavy Duty Truck, Shaanxi Heavy Duty Truck, Beiben truck, Foton truck and its related accessories. We mainly engage in various accessories products such as truck parts, cylinder blocks, crankshafts, diesel engines.
1.Power parts, including engines and peripheral parts [such as starters, generators, superchargers, various filter elements, etc.
2. Driving Part [also called transmission part], including clutch, gearbox, transmission shaft, axle, etc.;
3. Suspension part, including front and rear steel plates and fasteners, balance shaft, thrust rod, etc.
4. Steering part, including steering gear and Horizontal pull rods, etc.
5. Electrical appliances and valve parts, including various types of electrical switches, wiring harnesses, bulbs, and various braking components (valves).
6. Control and cargo parts, namely cab and cargo compartment.
7. Frame [that is, the beam] and so on.
1.Power parts, including engines and peripheral parts [such as starters, generators, superchargers, various filter elements, etc.
2. Driving Part [also called transmission part], including clutch, gearbox, transmission shaft, axle, etc.;
3. Suspension part, including front and rear steel plates and fasteners, balance shaft, thrust rod, etc.
4. Steering part, including steering gear and Horizontal pull rods, etc.
5. Electrical appliances and valve parts, including various types of electrical switches, wiring harnesses, bulbs, and various braking components (valves).
6. Control and cargo parts, namely cab and cargo compartment.
7. Frame [that is, the beam] and so on.
Overseas market at present:
Our sales have averaged over 10 years of experience in exporting, and are proficient in all processes of business operation which can efficiently fulfill customer needs.
We currently export to 37 countries, and the client partners from Russia, New Zealand, Fiji, Papua New Guinea, Malaysia, Zambia, South Sudan, United Arab Emirates, Zimbabwe, Colombia and so on. We can also help you to supply registration documents of the importing in different countries. Welcome new and regular customers to contact us to establish future business relationships and achieve common success.
We will We find the best transportation solution for you to reduce the transportation cost.
(1)Wax: Do wax spray process to against the trailer body suffer seawater corrosion during shipping
(2)Package: Stable fixing with steel wire,to protect the trailer during shipping
(3)Shipping: Reliable logistic service from famous freight supplier makes transport process safely and promptly
We will We find the best transportation solution for you to reduce the transportation cost.(1)Wax: Do wax spray process to against the trailer body suffer seawater corrosion during shipping
(2)Package: Stable fixing with steel wire,to protect the trailer during shipping
(3)Shipping: Reliable logistic service from famous freight supplier makes transport process safely and promptly
Q: What if I can not provide part number for reference?
A: If no part number, we can judge and quote the requested parts by engine name-plate or photos;
It would be great if you could provide us with the chassis number(VIN) so that we can provide a more comprehensive analysis and accurate quote feedback based on your truck model.
It would be great if you could provide us with the chassis number(VIN) so that we can provide a more comprehensive analysis and accurate quote feedback based on your truck model.
Q: Can we buy 1 pcs of truck parts for quality testing?
A: Yes, we are glad to send 1pcs item for quality testing if we have the truck parts of you need in stock.
Q: Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery.
Q: How do you make our business long-term and good relationship?
A: We keep good quality and competitive price to ensure our customers benefit;
We respect every customer as our friend and we sincerely do business and make friends with them, no matter where they come from.
We respect every customer as our friend and we sincerely do business and make friends with them, no matter where they come from.
Q: How long is the production time of the goods?
A: We have sufficient stock of regular specifications for immediate delivery; Non-conventional specifications generally require stocking for about 7-10 days; Large quantities order need to be in stock for about 15-20 days.
Q: What is the packing?
A: Neutral packing of paper carton or wooden case. Or we customize the packaging according to your requirements
