Product Description
DIRECTIONS
| Appearance | a thick, brassy liquid |
| Odor | slight smell of ketones |
| Density(g/cm3) | 0.78-0.92 |
| PH | 6-8 |
BENEFITS
1.Improve heat transfer and eliminate hot spots
2.Remains tacky to allow gasket re-position
3.Resists Chemical Solvent, including gasoline
4.Fills surface imperfections
5.High thermal stability (-45°C to +260°C)
6.Prevents wear and sticking
7.Simplifies the future removal
USAGE
1. Provide adequate ventilation.
2. Surfaces should be free of oil, dirt and grease.
3. Mask areas that should not be coated.
4. Shake can with ball agitator for one minute. For best results, aerosol can should be at room temperature before spraying.
5.Holding can 8 to 10 inches from the surface to be coated, press the nozzle and discharge the product uniformly. Apply to both sides of gasket. Avoid over spray. DO NOT SPRAY into engine compartment. Allow solvent to evaporate before assembly.
NOTE
Can coat 10 to 12 standard gaskets.
Keep put of reach of children.
STORAGE
Products shall be ideally stored in a cool, dry location in unopened containers at a temperature between 8°C to 28°C (46°F to 82°F) unless otherwise labeled. Optimal storage is at the lower half of this temperature range.
Production Line
Company Overview
Zhejiang Guoneng Technology Co., Ltd was establish from 1992. Over 20 years professional manufacture experience, we become one of the largest Manufacture on Adhesive in Huzhou City Zhejiang China.
Our company covers an area of 22,000 square meters, including 800 square meters of laboratory and we have over 200 employees. We specialize in the production and distribution of adhesive products,and they're well approved by SGS, Reach, RoHs, BSCI, ISO9001:2000 etc. OEM and ODM are both welcomed.
We'd like to cooperate with customers from all over the world based on mutual-benefit. We always put "Customers First" in our mind and commit ourselves to providing high quality HPPP (Honest, Prompt, Precise, Professional) service to all reliable and esteemed international partners and clients.
Certificates
After-Sales Service
Reply within 24 Hours
Professional consultation service is available within 24 hours after receiving your feedback regarding theiterms
that that you bought.
Global Insurance Service
Global insurance service guarantees the safety of iterms when installation and application.
Compensation Policy
Any quality problem caused by our company side with enough evidence, we promise you that if could bere-produced for free.
Contact us, you will get more than what you see !
