ST0209W
Bottle Jack
Hydraulic Jack
1-10T
Hydraulic
>400mm
ISO 9001:2008
New
Bottle Jack
Car Repair
170
380
3.1kg
Color Box
19kg
Double RAM
Hydraulic
/mm
210mm
custom
Color Packing or Blow Case
8T
China
8425421000
Product Description
| Use:Car,Truck | |||||||||||||||||
| Sea Port:Shanghai or Ningbo | |||||||||||||||||
| Lable:Costomized | |||||||||||||||||
| Sample:Available | |||||||||||||||||
| Material: Alloy Steel, Carbon Steel | |||||||||||||||||
| Color:Red,Blue,Yellow or customized color. | |||||||||||||||||
| Packaging:custom boxes,according client's requirements. | |||||||||||||||||
| delivery:sea freight,air freight,express. | |||||||||||||||||
| Tons:2,3-4,5-6,8,10ton. | |||||||||||||||||
| Essential equipment to safely lift the vehicles during repair and maintenance | |||||||||||||||||
Bitmap
| |||||||||||||||||
Bitmap
| |||||||||||||||||
Bitmap
| |||||||||||||||||
Bitmap
| |||||||||||||||||
Bitmap
| |||||||||||||||||
| Notes: | |||||||||||||||||
| When the vehicle is jacked up,do not open the engine,because the engine vibrates and the weels of cars turned easy to cause the jack slide down. | |||||||||||||||||
| Before operating the jacks,find a fixed postion.do not fixed on bumper or girde,etc.Do not overload the jack beyond its rated load. | |||||||||||||||||
| OPERATING INSTRUCTION | |||||||||||||||||
| 1.Before perating,estimate the weight of the load,Do not overload the jack beyond its rated load. | |||||||||||||||||
| 2.Select point of action according to the gravitational center place the jack on the hard ground if necessay,place a hard plank under the jack so as to avoid | |||||||||||||||||
| tottering or falling during operation. | |||||||||||||||||
| 3.Before operating the jacks,first,insert the notched end of the handle.into the release valve.Turn the operating handle clock wise until release value is closed. | |||||||||||||||||
| Do not over tighten the value. | |||||||||||||||||
| 4.Insert operating handle into the socket and the ram is steadily raised by the up and down movement of the handle and the load is raised.the ram will stope rising | |||||||||||||||||
| when the required height is reached. | |||||||||||||||||
| 5.Lower the ram by turning the release valve.Counterclockwise with the notched end slacken it slowly when a load is applied,or accidents can occur. | |||||||||||||||||
| 6.When more than one jack is used at the same time it is important to operate the different jacks at an equal speed with equal load.Otherwise,there is danger of falling the entire fixture. | |||||||||||||||||
| 7.At an ambienttemperatur from 27F to 113F use machine oil(GB443-84)N 15at an ambient temperature of from 4F to 27F use synthetic spindle oil(GB442-64).Sufficient filtered hydraulic oil | |||||||||||||||||
| should be maintained in the jacks,otherwise,the rated height cannot be reached. | |||||||||||||||||
| 8.Violent shocks must be avoided during the operation. | |||||||||||||||||
| 9.User must operate the jack correctly according to operating instruction:If the jacks has some quality problems,it can not be operated. | |||||||||||||||||
Model No. | ST0209w | |
| Capacity(ton) | 2 | |
| Min Height(mm) | 210 | |
| Lifting Height(mm) | 170 | |
| Adjust Height(mm) | / | |
| Max Height(mm) | 380 | |
| N.W.(kg) | 3.1 | |
