AHC-6130
Yes
Yes
Wood Chipper
Electric
CE
Tree Branches Shredder
32HP
500kg
Yellow
AUCHI
Wooden
500KG
China
8479820090
Product Description
wood chipper/ tree branches shredder
Mobile Orchard Tree Branch Shredder/Diesel Branch Shredder
Parameter
Application for Crushed chips :
Mobile Orchard Tree Branch Shredder/Diesel Branch Shredder
Introduction
Wood chipper shredder is widely used to chipping tree branch, wood logs and other forestry wood waste into wood chips, the final wood chips can be used as fuel and fertilizer of farm or garden. According to different requirement of wood chips, the knives can be adjusted to produce different sizes chips.Parameter
| Model | AHC-6130 | AHC-6145 |
| Cutter Drum Diameter | 300 mm | 500 mm |
| Power | 32HP/22 kw | 102HP/75kw |
| Engine Start | Electric Start | Electric Start |
| Speed rpm | 260 | 1800 |
| Knife ( pcs ) | 3 | 4 |
| Knife Length (mm) | 300 | 230 |
| Feed Press Roller Dia. | 280 mm | 600 mm |
| Inlet Size (mm) | 300*200 | 450*380 |
| Discharge Direction | 360° | 360° |
| Capacity | 1-2t/h | 3-5t/h |
| Max Feed Diameter: | 15cm | 20cm |
- Organic fertilizer: free decay into surface can be formed a good organic fertilizer.
- Flower potting soil packing: coverage of bare soil to prevent dust purification air organic fertilizer additive
- Mushroom cultivation base: apply to all kinds of mushroom cultivation recycling.
- Animal feed: freshwater fish or natural organic pollution of plant-eating animal feed.
- It can also be used in landscaping, paper mill, charcoal mill, feed mill, wood-based board factory, incense factory and so on .
]Main Features
- The machine is movable type so you can start work at any time in any place
2. Feed roller is made of alloy steel, ensuring the durability in the feeding process. Special tooth can tightly press materials, ensuring uniform and continuous feeding in material transport avoiding skid phenomenon.
3.High volume discharge chute. Adjustable chip deflector.
4. EASY SWIVEL DISCHARGE CHUTE--360 degrees of rotation allows you to swivel the discharge chute so that you can direct the chips into the back of a truck or trailer without having to move the entire machine. Simply push down on the handle and swing the chute.
5. WIDE FOOTPRINT SKID TYPE SUPPORT BASE prevent the machine from sinking into the soft ground during operation
6. A DJUSTABLE CHIPPER BASE LEGS will help accommodate a larger variety of tractors.
7. The in-feed hopper on the wood chippers is horizontal and approximately table height for easy material loading.
8. The clear vinyl baffle feature protects the user from chip blow-back, while allowing the user to see what is going on in the hopper.
9. MACHINE ARE EQUIPPED WITH TWO TAILLIGHTS AND ONE GENERAL LIGHTING. You can work even at night.
10. Machines are 90% assembled on delivery
