DH 32/DH40
BOLI
China
Product Description
DH Drilling Machine> DH32
· Drilling, tapping, boring, reaming
· Strong column, vice table, gear drive, lower noise
· Heavy-duty tapered roller bearing spindle, positive spindle lock
· All gears are haedened and ground
· Machanical safety device for headstock
· Easy to change auto feed
Standard Accessories:
> Draw bar
> Adapter
> Taper shank for drilling chuck
> Drilling chuck
> Arbor
> T slot bolt
> Washer
> Nut
> Tilted wedge
> Spanner
> Oil gun
Optional Accessories:
> Vices
> DH40
· Drilling, tapping, boring, reaming
· Gear driving and strong cutting power
· 2 speed strong power motor, wide range speedc change
· Electric system according to IEC standard, equipped with short cut and overload protection
· Automatic tools ejectors, equipped with cooling system and tapping mechanism
· 2 steps power feed 0.1-0.2mm/rev
Optional Accessories:
> "T"-Tilting worktable
> "L"- L type worktable
Technical Parameters:
| Model No. | Unit | DH 32 | DH 40 |
| max. drilling capacity(iron/steel) | mm | 35(1.38") | 45(1.77") |
| max. tapping capacity(iron/steel) | mm | 22/20(0.79"/0.79") | 22/24(0.87"/0.94) |
| spindle taper | MT4 | MT4 | |
| worktable size | mm | 460×460(18.11"×18.11") | 560×560(22.05"×22.05") |
| dimensions of base | mm | 620×540(24.41"×21.26") | 735×510(28.94"×20.08") |
| spindle travel | mm | 160(6.23") | 180(7.09") |
| distance spindle center to column surface | mm | 300(11.81") | 350(13.78") |
| spindle nose to worktable | mm | 720(28.35") | 770(30.31") |
| spindle nose to base | mm | 1200(47.24") | 1215(47.83") |
| column diameter | mm | 125(4.92") | 150(5.91") |
| spindle speeds range(optiona) | rmp | 12steps: 75~3200 | 18steps: 50~1450 |
| spindle power down feed | mm/r | 0.06/0.12/0.18 | 0.1/0.2 |
| motor | kw | 1.5/1.1 | 0.85/1.5 |
| N.W./G.W. | kg | 350/400 | 540/600 |
| packing size(L×W×H) | mm | 2200×540×750 | 2270×580×1100 |
| 20' Container | sets | 24 | 20 |
