COLO-3232
Hardware Spraying Equipment
CE
3PCS
110V/380V
1 Year
Colo
L2920 X W620X H1500mm
750kg
Drive-Thru
3.5kw
Electric
SPCC/= 1.5mm
Electrostatic Spraying Equipment
Powder
Automatic
New
COLO
Wodden Case
can be ordered
Hangzhou. China
8424899990
Product Description
COLO-3232 standard Powder Coating Spray Booth For USA Customer
equipo de cabina
Industrial Automatic Spray Booths easy operation with good powder recovery systems.
booth size and color can be designed by the requst.
Specification:
1.Spray booth:
Inner Size: L2920 x W620x H1500mm
Booth board: SPCC/= 1.5mm Bending and forming
Under frame:40# square tube
Filters:325*900- 3pcs
fan motor: 3.5KW, 1pcs
2.Technical data
3.Replacing the filter cartridges Replacing the filter cartridges
Procedure for replacing the filter cartridges
If a filter cartridge is damaged, but the damage can not be found, then the complete filter
cartridges set must be replaced. The access to the filter
cartridges takes place from the rear of the booth
4.Control cabinet-Bottom:
1,power on/off
2,hopper go up/go down
3, emergency stop
PLC Controller
Operation:
When you want to stop the work, please press F6 ,make the fan off, like this
Then press the bottom 1 to make the power off.
In the side of the booth have the switch to control the light larms
More details
Contact:
Miss Sonne Xie
Mobile: 0086-13396517032
equipo de cabina
Industrial Automatic Spray Booths easy operation with good powder recovery systems.
booth size and color can be designed by the requst.
Specification:
1.Spray booth:
Inner Size: L2920 x W620x H1500mm
Booth board: SPCC/= 1.5mm Bending and forming
Under frame:40# square tube
Filters:325*900- 3pcs
fan motor: 3.5KW, 1pcs
2.Technical data
| Model | COLO-S-3212 |
| Booth Type | drive-thru |
| Operator dimensions | 620width x 1500 height x 2920 depth (2PCS) |
| Overall dimensions | 1200width x 2033 height x 3000 depth |
| Weight | 500kg |
| Power supply | Electric |
| Nominal power | 3.5kW |
| Voltage | 380V |
| Frequency | 50-60Hz |
| Filters | Polyester |
| Filters count | 3 |
| Filters hang type | easy for change |
| Filter cleaning system | Pneumatic |
| Warranty | 12 months |
3.Replacing the filter cartridges Replacing the filter cartridges
Procedure for replacing the filter cartridges
If a filter cartridge is damaged, but the damage can not be found, then the complete filter
cartridges set must be replaced. The access to the filter
cartridges takes place from the rear of the booth
| Dismantling: | |
| 1.fix the screw on the top | |
| 2.Hold the cartridge with both hands, so that the filter's six ears for quick release cover six corresponding gap | |
| 3.His hands up top, while the rubber ring as a fulcrum to sixty degrees clockwise | |
| 4.Check the filter is fully embedded in the quick release cover, hand gently pulled the filter is securely | |
1,power on/off
2,hopper go up/go down
3, emergency stop
PLC Controller
Operation:
| 1.press bottom 1 ,make the power on |
| 2,Press ↑or↓ ,make the display screen display like this |
| 3,Press F4 ,then into the booth control interface like this |
| 4,Press F6,then the fan will on ,like this |
When you want to stop the work, please press F6 ,make the fan off, like this
Then press the bottom 1 to make the power off.
In the side of the booth have the switch to control the light larms
More details
Contact:
Miss Sonne Xie
Mobile: 0086-13396517032
