The ZTQ100 drilling rig is based on the ZTD pneumatic submersible drilling rig of our company. The design of the power source is changed and the function is identical with that of the ZTD pneumatic drill. The auxiliary equipment that provides the power is even lighter. It is easier to move and transfer. Where there is a power supply, only a 7m / min electric air compressor is needed. Even if there is no power supply, a 15KW generator can be added to meet the single machine operation. It is convenient for the equipment to enter the field, and the motor is less worn and maintained than the wind motor, so it is a light and economical model.
The DTH rock drilling rig is to make the impactor dive into the hole during the rock drilling process to reduce the energy loss caused by the impact energy transmitted by the drill rod, thereby reducing the impact of the hole depth on the rock drilling efficiency.
Model | ZTD70 | ZTQ70 | ZTD100 | ZTQ100 | |
Drilling Diameter | 50-90mm | 50-90mm | 90-130mm | 90-130mm | |
Drilling Depth | ≤15m | ≤15m | ≤25m | ≤25m | |
Working Pressure | 0.5-0.7Mp | 0.5-0.7Mp | 0.5-1Mp | 0.5-1Mp | |
| Rotation Speed | 110r/m | 110r/m | 110r/m | 110-160r/m | |
Drilling Pipe | Diameter | 42mm | 42mm | 50-60mm | 50-60mm |
Length | 1025mm | 1025mm | 1025mm | 1025mm | |
Size | 1740*260*420mm | 1740*260*420mm | 2280*400*550mm | 2280*380*550mm | |
1. Advanced materials technology and optimized design give you high productivity, reliability, and lower operating costs.
2. With gas-electric linkagey, you receive lower fuel consumption.
3. In-house and industry-leading carbide selection ensure the best quality tools.
1. Before starting work, carefully check whether the gas and water pipelines are firmly connected and whether there is any leakage of air or water.
2. Check whether the oiler has been filled with gasoline.
3. Check whether the screws, nuts, joints, etc. of each part have been tightened and whether the uprights are indeed firmly supported.
Drilling Rig
Shaanxi Zhongtuo Mining Equipment Company was founded in 2005 in Xi'an, Shaanxi Province, It is a foreign trade company specializing in the research, development, and sales of machinery and equipment in the fields of mining, bridges, pavements, and tunnels.
With the improvement of high-quality products and good services, our products are trusted and appreciated by customers from all over the world. At present, our customers are all over Russia, Thailand, Romania, Bulgaria, Albania, Colombia, Brazil, Peru, Uruguay, Saudi Arabia, Kuwait, United Arab Emirates, Oman, Turkey, Israel, Kazakhstan, India, and many other countries.
We would provide customers with a one-year warranty, during processing, if customers have any problems with installation and use, we have professionals to provide online text, voice, or video communication services for them.
Q1: Whether the rig is used for rock holes or soil holes?
A1: Equipped with different drill bits according to the application object. Rock drilling rigs are equipped with round steel drill impact hammers and rock drill bits. The soil drilling rigs require a twist drill pipe and a three-blade drill bit.
Q2: How much tonnage can a bridge jack lift??
A2: The range is from 50 to 1000 tons, depending on the application needs we have the right choice for you.
Q3: How many meters is the connection between the jack and the oil pump?
A3: The factory standard is two meters. If you need longer, we will make it for you.
Q4: What is the difference between the hydraulic oil pump?
A4: For the tension jack, it is 50 MPa 3 kW oil pump and 60 MPa 4 kW oil pump.
Q5: What kind of packages does a set of anchors have?
A5: Anchor ring, clip, anchor pad, spiral rib.
Q6: Which payment term can you accept?
A6: 100% T/T( Decide according to actual situation)
Q7: How long is the machine warranty?
A7: One year for the machine and provide technical support according to your needs.
Q8: How long will it take to arrange production?
A8: we can deliver the normal goods within 7-15 days. Other nonstandard electrical items we will deliver within 25-30 days.
Q9: Which trade term can you accept?
A9: Available trade terms: FOB, CIF, CFR, EXW, etc.
Q10: Do you provide samples? Is it free or extra?
A10: Yes, we could offer you the sample machine. But it's not free. You need to pay for the sample and the cost of the freight.
Q11: What are your terms of payment?
A11: We accept T/T, Western Union, Money Gram, Paypal, L/C, etc.
