Technical parameters of Tonhe DC Fast Adjustable Plug and CE Approved Electric Vehicle Public EV Charger Station
| Specification | Model | TH-AHTH-DC120-CC002 | |||||
| AC Nomal Input | Phases/Lins | 3 phase+neutral+PE | |||||
| Voltage | 400VAC±10% | ||||||
| Frequency | 50Hz±10% | ||||||
| Connector | CCS | ||||||
| Output | Power | 120KW | |||||
| Volatge | CCS:200-750VDC | ||||||
| Cable Lenth | 5m | ||||||
| Cable Type | Charging cable and connecter permanently attached to EVSE (liquid cooled) | ||||||
| Electrial Parameter | Power Factor | ≥0.99,≥ 0.96 (Full Load) | |||||
| THD Value | ≤5% | ||||||
| Stable Voltage Accuracy | ≤±0.5% | ||||||
| Stable Current Accuracy | ≤±1% | ||||||
| Efficiency | ≥95% at nominal output power | ||||||
| Structure Design | Housing Material | Galvanized steel | |||||
| Installation Method | Vertical installation of ground | ||||||
| LED Indicator | 10 inches with 720 x 480 pixels TFT LCD Screen, user interface with touch screen or keypad.Toughened unbreakable glass to be used for display screen | ||||||
| ON-OFF (Start-Stop) Switches | Mandatory | ||||||
| Emergency Stop Button | Mushroom headed type | ||||||
| Payment Method | RFID CARD /Phone APP with backend | ||||||
| Communication | Charegr v.s. Backend | Ethernet, Wi-Fi and 2G/3G/4G | |||||
| Communication Protocal | OCPP1.6 | ||||||
| Environmental in dex | Working Temperature | -20ºC-+65ºC | |||||
| Storage Temperature | -40ºC-+65ºC | ||||||
| Working Altitude | ≤2000M | ||||||
| Atmospheric pressure intensity | 80 kpa to 110 kpa | ||||||
| Application Site | Indoor/Outdoor | ||||||
| Cooling Method | Forced air cool | ||||||
| Security Protection | Multiple Protection | Over Current, Under Current, Over Voltage, Residual Current, Surge Protection, Short Circuit, Earth Fault at input and output, Input Phase reversal, Emergency Shut-down with alarm, over temperature, Protection against electric shock. | |||||
| Warranty | 3 years | ||||||
| Package Information | Product Dimension | 550*850*1950(W*D*H) | |||||
| Net Weight | 256KG | ||||||
| External Packing | Wooden case | ||||||
| General Requirements | |||||||
| Energy Transfer Mode | Conductive | ||||||
| Charging Mode | CCS 2.0 - mode 4 - DC fast charging | ||||||
| Reliability and Serviceability | Modularity, self-diagnostic features, fault codes and easy serviceability in the field | ||||||
| System Structure | |||||||
| Regulation Method | Regulated DC EV Charging Station with combination of CVC or CCC but not simultaneously | ||||||
| Isolation | Each output isolated from each other with proper insulation | ||||||
| Power Supply | DC EV charging station connected to AC mains | ||||||
| Charge control communication | Communicate by digital and analog signals | ||||||
| Interface inter-operability | Inter-operable with any EV supporting CCS (for each gun respectively) | ||||||
| Operator | Operated by a trained person or EV owner | ||||||
| Input Requirements | |||||||
| Input Supply Failure Backup | Battery backup for minimum 1 hour for control system and billing unit, to enable activities such as billing, to be provided | ||||||
| Output Requirements | |||||||
| No. of Outputs | 2 | ||||||
| Output Connectors | 2 output connectors | ||||||
| Output Connector Compatibility | CCS: IEC 61851-23/24, IEC 62196-3, DIN 70121. | ||||||
| Mechanical Requirements | |||||||
| Mechanical Stability | Shall not be damaged by mechanical impact as defined in IEC 61851-1 | ||||||
| Mechanical Impact | Shall not be damaged by mechanical impact as defined in IEC 61851-1 | ||||||
| User Interface and Display Requirements | |||||||
| Visual | Visual Indicators:Error indication, Presence of input supply indication, State of Charge process indication. Voice notifications:Voice Notifications: Related to start and stop of charging session in English / Nepali | ||||||
| Support Language | English, with provision for additional regional languages | ||||||
| Display Messages | EVSE should display appropriate messages for user during the various charging states like:-Vehicle plugged in / Vehicle plugged out'-Duration since start of charge and kWh consumed'-User authorization status'-Fault Conditions-Metering Information: Consumption Units | ||||||
| Performance Requirements | |||||||
| DC Output Voltage and Current Tolerance | DC Output current regulation in Constant Current Charging (CCC); ±2.5 A for the requirement below 50 A, and ±5% of the required value for 50 A or more DC Output voltage regulation in constant voltage charging (CVC); | ||||||
| Control delay of charging current in CCC | DC output current demand response time1 s Ramp up rate: 20 A/s or more.Ramp Down rate: 100 A/s or more | ||||||
| Descending rate of charging current | EVSE should be able to reduce DC current with the descending rate of 100 A/s or more | ||||||
| Periodic and random deviation(Current ripple) | DC Output current ripple limit of EVSE:1.5 A below 10 Hz, 6 A below 5 kHz, 9A below 150 kHz | ||||||
| Periodic and random deviation(Volatge ripple) | Max. Ripple voltage ±5 V. Max slew rate ±20 V/ms | ||||||
| Billing Requirements | |||||||
| Software Solution | CMS and USER APP | ||||||
| Billing | Grid Responsive metering | ||||||
Tonhe DC Fast Adjustable Plug and CE Approved Electric Vehicle Public EV Charger Station
Tonhe is a high technology enterprise specialized in innovation of technology, product and management in the power electronics industry, and R & D, manufacturing ,sales, operation and service of EV charger module&rapid charger point and related products , providing customers with system solution for the energy sector. Tonhe was established in 1998 and got listed in 2015 with stock code 300491.
Tonhe is the first power electronics enterprise in China to realize full-process power conversion soft switch, and has accumulated more than 140 patents. Continuous research and development investment has enabled Tonhe to achieve a high market share in the field of electric operating power supply, charging station, on-board power supply and special power supply.
R&D Team
We have been focusing on the field of power supplies since the 1998s, investing 10% of our sales revenue into the R&D team every year. 
Tonhe DC Fast Adjustable Plug and CE Approved Electric Vehicle Public EV Charger Station
Main Features:
CCS1 or CCS2, CHAdeMO and GBT configure support.
IP54design with high protection and high reliability under harsh environment.
Smart charging and power management support.
Optional CoolRing technology enables power to transfer between two EV chargers so as to realize a maximum power of 360kW at one side.
Power transfer between two charging connectors.
180kW charging capacity, maxium current 300A and charging voltage from 150Vdc to 1000Vdc.
User Friendly interface with tempered glass protective 7'' TFT capacitive touch screen LCD.
Multiple charging modes: Auto basis, Amount basis, Energy basis, SOC basis.
Multiple power distribution modes: Stand alone, Current switch, Plug Switch, Full hold.
Internal high precision AC energy meter and DC energy meter, optional VDE and PTB certification type.
LAN and optional LTE wireless support, OTA support, RFID authorization and Mobile App payment support.
Tonhe DC Fast Adjustable Plug and CE Approved Electric Vehicle Public EV Charger Station
(Cartons&wooden packaging and the shipping, you could choose based on the specific quantity)
EV Charging Station Project
Applicated in ship enviroment in Tailand, our ev chargers solution was meet clients requirements and good performance for ev chargers, then help us won the repeat order for 50pcs EV chargers Tonhe EV Charing stations model in this project.
ou charging modules&chargers have been exported to overseas countries, including Australia, Russia, Germany, Italy, Turkey, India, Poland, Thailand, Singapore, Vietnam, Brazil, Colombia, etc.
Q: How do you handle shipments?
A: 1. For small orders, we send goods by FedEx, DHL, UPS, express service on door to door term.
2. For large shipments, we send goods by sea or by air in containers.
Ps. it's highly recommended to delegate your own forwarders to handle shipments and FOB Shijiazhuang is widely adopted by our customers.
Q: What is your delivery time?
A: Normally, we need about 30 days to prepare your goods. For orders in large quantities and customized orders, the time for shipment will be a little longer.
Q: What is your term of payment?
A: Our standard term is 100% TT advance with order. However, it is negotiable under the condition of long-term strategic cooperation.
Q: What is your customized service?
A: With abundant experience in various kinds of OEM and ODM projects, we provide flexible and professional customized service. The MOQ varies based on your customized requirements.
Q: How long is the warranty?
A: The warranty of our products is 12months upon the receipt of your shipment under normal circumstances.
Q: What is your guarantee of after-sale service?
A: In response to every single after-sale request within the warranty, we will appoint a one-on-one technician for timely online aid.
Q: What are the certifications for your products?
A: Our products are well qualified to be exported to the majorities of overseas countries with international certifications, such as CE for the Europe, UL for the United States and KC for the South Korea.
Send Message
