Turnable Lift Table for Industry Use /Lift Tables

                                                       Turnable Lift Table for Industry Use /Lift Tables
 Heavy duty design.
With safety guard.
With anti-explosion valve.
Customs' special requirements are acceptable.
HW series lift tables meet EN norm and ANSI/ASME safety standards.
These models can be used in above-floor or in-floor pit applications.
 Upper platform lifted with aluminum safety bar preventing descent on contact with obstructions.
Low-tention(24V) control box with up-down buttons.
Internal power pack equipped with relief valve against overloading and compensated flow valve for controlled lowering speed.
Heavy duty cylinders with drainage system and check valve to stop the lift table lowering in case of hose burst.
Safety clearance between scissors to prevent trapping during operation.
Self lubricating bushings on pivot points.
Removable lifting eye to facilitable handling and lift table installation.
  

Model	Capacity	Lowered Height	Raised Height	Platform Size	diameter of working disk	Lift Time	Power pack	Net Weight
	kg	(mm)	(mm)	(mm)	(mm)	(second)		(kg)
HW1001	1000	205	1000	820×1300	φ820	20-25	380v/50HZ,AC1.1kw	160
HW1002		205	1000	1000×1600	φ1000	20-25		186
HW1003		240	1300	850×1700	φ850	30-35		200
HW1004		240	1300	1000×1700	φ1000	30-35		210
HW1005		240	1300	850×2000	φ850	30-35		212
HW1006		240	1300	1000×2000	φ1000	30-35		223
HW2001	2000	230	1050	850×1300	φ850	20-25	380v/50HZ,AC1.5kw	235
HW2002		230	1050	1000×1600	φ1000	20-25		268
HW2003		250	1300	850×1700	φ850	25-35		289
HW2004		250	1300	1000×1700	φ1000	25-35		300
HW2005		250	1300	850×2000	φ850	25-35		300
HW2006		250	1300	1000×2000	φ1000	25-35		315
HW4001	4000	240	1100	1200×1700	φ1200	30-40	380v/50HZ,AC2.2kw	375
HW4002		240	1100	1200×2000	φ1200	30-40		405
HW4003		300	1400	1000×2000	φ1000	45-50		470
HW4004		300	1400	1200×2000	φ1200	45-50		490
HW4005		300	1400	1000×2200	φ1000	45-50		480
HW4006		300	1400	1200×2200	φ1200	45-50		505
HW4007		300	1400	1500×1700	φ1500	45-50		420
HW4008		300	1400	1800×2200	φ1800	45-50		540

 




Q: What about the quality of the products?
A: Our products are CE approved, and we have five inspection steps before shipment:
1. Inspect the raw material in accordance with ISO9001;
2. Strict inspection in the whole production process;
3. Load limit test when assembling finished;
4. 100% strict inspection of products before shipment;
5. If needed, inspection by buyer.

Q: How long is the quality guarantee?
A: All of our products carry one-year warranty.

Q: What's the leadtime?
A: Normally 30 days.
If you order more than 5 itmes mixed in one container, it will be 45 days.
If you order one item in one container, it will be 20 days.