TY400 Tractor
Main Features
* Integral type flat floor, side-mounted transmission control, suspended pedal,beautiful shape and driving comfort;* Optional safety frame or heating cab;
* Optional EPAIV engine in order to meet different emission requirement area;
* Double-acting clutch, 8+2 /10+2 shuttle type shiftgear,with working efficiently. Featuring reasonable speed-matching,high working efficiency,and good fuel economy in all kinds of farmland homework and transportation.
* Optional synchronizer shuttle-type shiftgear, lightness control and flexible and reliable;
* Hydraulic steering,front drive axle of puncturing fuel cylinder, steering control and light and flexible;
* Provide EC,EPA,GOST certification model.
* Equipped with 4 cylinder engine,direct injection engine, start convenient,low fuel consumption,high tractiong,high reliability and high coefficient of torque reserve.
* With heavy-duty chassis,high traction,and high double-speed PTO shaft,it works more efficiency.
* Equipped with the side operation control device and the shift sleeve device,featuring convenient,comfortable,and reliable control.
* Reinforced dual-speed power take-off, featuring the wide range of optional machinery and tools and high reliability.
* Hydraulic lifting device adopted position control and float control, easy to operate and provides reliable performance.
* The complete vehicle adopts the optimized ergonomic design to improve the driver's safety feeling,and the comfort to control.
* A new generation of steamline hood,with beautiful and elegant appearance,conforming to the safety,dust-proof,noise-reduction,heat-removal and other performance requirements.
* Light and better sealed, give it high performance in paddy field farming.
| Model | TY400 Tractor | TY404 Tractor | |
| Drive Type | 4×2 | 4×4 | |
| Engine | |||
| Engine Manufacturer | Jiangsu,Jianghuai | Jiangsu,Jianghuai | |
| Engine Model | JD490T | JD490T | |
| Engine Type | inline,vertical,water-cooled,four-stroke | inline,vertical,water-cooled,four-stroke | |
| Cylinder diameter(mm) | 90 | 90 | |
| Stroke(mm) | 105 | 105 | |
| Max Torque(N·m)/Revolving Speed(rpm) | ≥165/≤1725 | ≥165/≤1725 | |
| Displacement(L) | 2.67 | 2.67 | |
| Fuel Tank Capacity(L) | 51 | 51 | |
| Engine Rated Power (kW/rpm) | 29.4 | 29.4 | |
| Rated Operating Conditions Fuel Consumption Rate(g/kW·h) | ≤245 | ≤245 | |
| Drive Train | |||
| Clutch | Dry,single-stage | Dry,single-stage | |
| Standard PTO speed(rpm) | (540,1000)/(750,1000)/(540,750) | (540,1000)/(750,1000)/(540,750) | |
| Gears | 8F+2R/10F+2R | 8F+2R/10F+2R | |
| Speed range(Km) | 2.17~27.7 | 2.17~27.7 | |
| Steering type | mechanical steering | hydraulic steering | |
| Gear Shift Mode | sliding gear shift | sliding gear shift | |
| Break System | |||
| Service Brake | pedal,mechanical drive,closed shoe type | pedal,mechanical drive,closed shoe type | |
| Parking Brake | locked pedal | locked pedal | |
| Hydraulic System | |||
| Hydraulic Output Flow(L/min) | 30 | 30 | |
| Hydraulic Output Valve | 1 way(optional) | 1 way(optional) | |
| Working Device | |||
| Three-Point Suspension | postposition,Category I | postposition,Category I | |
| Max.Lifting Capacity(kN) | ≥6.62 | ≥6.62 | |
| Tillage Depth Adjustment | draft and position adjustable | draft and position adjustable | |
| General Parameter | |||
| Overall Dimension(L×W×H)mm | With cab | / | / |
| Without cab | 3315×1490×2105 | 3360×1490×2100 | |
| Wheelbase(mm) | 1960 | 1950 | |
| Min. operating weight(kg) | With cab | / | / |
| Without cab | 1630 | 1890 | |
| Min. Ground Clearance(mm) | 485 | 365 | |
| Min.turning radius(mm) | 3200 | 3300 | |
| Maximum Pull(KN) | 7.8 | 12 | |
| Front Tire | 6.0-16 | 7.5-16 | |
| Rear Tire | 11.2-28 | 11.2-28 | |
| Optional Disposition | |||
| hydraulic steering, dual-stage clutch, shuttle gear(creeper gear), paddy tire, swing draw bar, ROPS with canopy, 1 group hydraulic output | dual-stage clutch, shuttle gear(creeper gear), paddy tire, swing draw bar, rear counter weight, ROPS with canopy, 1 group hydraulic output | ||
QC Flow:
2. Inspection for half-finished products during order production to find the problem earlier if any;
3. Inspection for finished products after production to make sure the products comply with customer's requirement.
Department Introduction of QC / Technical Support:
In order to get super quality, we have special QC department to control the product quality. This department is composed by experienced engineers who can offer us strong technical support easily. The engineers will inspect product quality both in order production and after order production to make sure each shipment we send to our customers is in the best status. With their strict quality control, our consistent quality wins us more and more orders from our international customers.
Full Service and Product Warranty:
We offer our customers technical assistance and a full one year warranty on all products covering all manufacturing defects. ME Our manufacturing facility is completely computerized to provide our customers efficiency, reliability, high quality and timely shipments. Spare Parts:We can supply spare parts within 15 business days or sooner. Currently, part numbers are not available on-line. You may however determine the part number from your Parts Book or, if it is a simple part, you may describe the part and send us an order online. If you are not sure, please Contact Us . Shipment: We can ship from our port in Qingdao or Shanghai, China to anywhere in the world within short days 
Q1: Are you a factory or trading company?
We have our factory for the farm machines and we also have our own trading company with self-supported import and export right.
Q2: How can I trust on your company?
We are a fully registered manufacture and exporting company by China Export Registration Authorities. Moreover, our products have been exporting to a number of countries including Switzerland, Russia, Spain, Netherlands, Australia, Peru, Thailand, Pakistan, Indonesia, Tanzania, Nigeria, South Africa, Sudan, Congo etc.
Q3: Where is your factory located? How can I visit there?
Our factory is located in Linyi City, Shandong Province, China. About 1 hour away from Linyi Airport, 4 hours away from Qingdao airport. All our clients are warmly welcomed to visit us!
Q4: How can I place an order from your website?
It is very easy.Once you find the implement you need on our website and place an inquiry against it, or, get to the inquiry section and leave us a message there with name, country and phone number, we will get in touch with you at the earliest.
Q5: How can I make the payment?
Payment is made via Telegraphic Transfer (T/T) through the bank against the proforma invoice.
30% as prepayment and the balance when the goods are ready for shipping.
Q6: What's the Payment terms?
T/T, L/C or some other ways payment method.
Q7: At which port do you usually ship the good?
We usually ship goods via Qingdao port of China.
Q8. How about the Warranty ?
12 months warranty from the time of the goods arrive at destination.
