Best Price of UHMWPE Facing Pad/Corner UHMWPE Fender Face Plates

UHMWPE (Ultrahigh molecular weight polyethylene)is the molecular weight of more than 1.5 million in PE  material.UHMWPE marine fender pad are widely used as a part of marine fender in  ports instructure .

Advantages of uhmwpe marine fender pad  for port / dock / wharf protection:

1. UHMWPE virtually no water absorption
2. Non-Toxic and smell,it can meet standards
3. Good self-lubrication, the same as PTFE
4. Good anti-corrosion resistance, it has very stable chemical property and can endure the corrosion of all kinds of corrosive medium and organic solvent in certain range of temperature and humidity.
5. No adhesion, the surface of product hardly affix any other material.
6. Anti-bacterial
7. Low coefficient of friction
8. Abrasion and impact resistant
9. Anti-Weather and Anti-Aging

10. High Tensile Strength
Advantages are:

• Very high impact strength
• Very low friction coefficient
• Very high abrasion resistance
• UV + Ozone resistant
• Non-conducting (optional)
• 100% recycable, non-rottening
• Cut to size sheet ,all size is available with us 
• Standard colour :Black ,Yellow ,Blue ,Green ,Red,White  ,other colour is available upon request .

The application is as follows:

• low resistance sliding plates on fender panels
• low resistance sliding panels for bridge and pier protection
• corner protection for offshore structures, berths and other marine facilities

Specification(for special (For special requirements ,please contact us ) :UHMW-PE Flat Fender pad ,UHMW-PE Corner Fender pad ,UHMW-PE Edge Fender pad all is available ,:

For special drawing and properties of UHMW-PE Fender facings /UHMW-PE Fender Pad, Please contact us by  our  email.

UHMWPE sheet are widely used in Marine industry , Abosn made the fender grade UHMW-PE sheet to meet Marine industry request . Abosn Fender grade UHMW-PE sheet have the following characters to make it be the best choice in Marine industry : 

1. Non-Toxic and smell 

2. Low coefficient of friction

3. Corrosion resistant

4. Abrasion and impact resistant

5. Anti-Weather and Anti-Aging

6. Self-lubricating

7. Wear Resistant
Which type Marine fender UHMW PE pad we can produce :

1. SCN Supper Cone Fender

2.Arch Marine fender

3.SCK Cell Fender

4.UE-V Fender

5.MV Fender

6.Parallel Motion Fender

7.Composite Marine Fender

8. Cornered fender pad

Standard size of UHMWPE marine fender pad(other size can be cut for you):

2000*1000*(6-300) mm    3000*1500*(6-300) mm

3050*1220*(6-300) mm  4500*2000*(6-300) mm

4700*1200*(6-300) mm    5000*1300*(6-300) mm

APPLICATIONS

1. HARBOUR CONSTRUCTION

 Profiles on quay walls, rubbing blocks to cover wood and rubber

2. TRUCK DOCKS

 Fenders pads/blocks for dock protection

3. DREDGES

 Wall fenders to protect dredge from barges

4. BOATS

 Rubbing/Wear Strips, low friction bushings (low to med load only)


The panels are available in various sizes (made to order) and colours. As a result, these panels can also be used for (limited) navigational purposes.

• Mainly manufacture HDPE and UHMWPE products.
• Have rich experience in the line of engineer plastic products for long time.
• Passed the latest ISO9001:2008 quality system.
• Located in Qingdao, the third-largest port city in China.
• Convenient traffic and developed imports and exports.