Compression Garbage Truck KD5071ZYS
Features:
1. The vehicle body is arc-shaped, featuring simplicity and good appearance. A slide guide moving cover is installed at the back to keep the complete closure of the dustbin.
2. The body is made of high strength weathering resistant steel, featuring light weight, good reliability, erosion resistance and high compression ratio.
3. The use of alloy slide guide with high abrasion resistance guarantees its long service time.
4. The stuffing device is equipped with two-stage protections of self-lock cylinder and safety rod for reliability.
5. Two sets of control mode: manual and automatic. The controls can be done at different locations: the cab, the middle and at the back of the truck.
6. The truck has a big dustbin. Under the same compression ratio it can hold more garbage to achieve a better loading efficiency.
7. A large waste water collecting tank is equipped with a drainage waste water collection device to eliminate waste water dripping.
8. Optional lifting devices can be added to the truck when ordered by customers.
| KD5071ZYS Compression Garbage Truck | Technical Parameters |
| Chassis model | ISUZU NKR77LLPACJAY(Euro III) |
| Engine model | 4KH1-TC |
| Engine power(kw) | 96 |
| Total weight(kg) | 7290 |
| Unladen weight (kg) | 5200 |
| Rated capacity (kg) | 1960 |
| Dimension(mm) | No device 6175×2130×2340 Barrel 6420×2130×2340 Skip bucket6525×2130×2340 |
| Maximum speed(km/h) | 95 |
| Feeding port capacity(m 3 ) | 0.66 |
| Feeding port size(width)(mm) | 1565 |
| Feeding port height from the ground(mm) | 940 |
| Compress way | Two waycompress |
| Cycle time of loading(s) | 13 |
| Garbage discharging time(s) | 16 |
| Lifting cycle time(s) | 15 |
| Dustbin capacity(m 3 ) | 6.5 |
| Recovery tank capacity(L) | 420(125 two in front 170 at back) |
| Garbagecompression density(T/m 3 ) | 0.7 |
| Largest broken compressive force(kN) | 112 |
| Maximum pushing force(kN) | 156 |
| Hydraulic systemworking pressure(Mpa) | 16 |
| Cab | original factory air condition |
