20B. 5
GS, RoHS, CE, ISO9001, ISO9001: 2000
New
>40m
>16t
2
Three-Arm
Small Crane
20t
3m
42.12m
75s
95s
Sc8dk260q3
192/2200kw/(R/Min)
26020kgs
6900kgs
19120kgs
in Nude Package
CE
China
84289090
Product Description
QY20B.5 Truck Crane uses self-made truck crane special chassis, with powerful engine and fully-covered
decking plate.
Main and auxiliary winches realize low speed with heavy load and high speed with light load, high working
efficiency.
4-section telescopic boom of all-round boom profile, 1-section side-mounted jib, single cylinder for front support elevating, fully hydraulic drive, and double H-shaped outriggers.
Well-equipped safety devices such as automatic load moment limiter (AML), overload and over-wind cut-out device, etc., greatly improved safety in operation.
Two cabs ergonomically designed conform to ISO standard, fan, heater and air conditioner equipped acc.
to requirement. Driver's cab is left semi-mounted, fitted with damping and adjustable seat. Operator's cab is right semi-mounted, equipped with
LCD monitor for display of crane various motions.
decking plate.
Main and auxiliary winches realize low speed with heavy load and high speed with light load, high working
efficiency.
4-section telescopic boom of all-round boom profile, 1-section side-mounted jib, single cylinder for front support elevating, fully hydraulic drive, and double H-shaped outriggers.
Well-equipped safety devices such as automatic load moment limiter (AML), overload and over-wind cut-out device, etc., greatly improved safety in operation.
Two cabs ergonomically designed conform to ISO standard, fan, heater and air conditioner equipped acc.
to requirement. Driver's cab is left semi-mounted, fitted with damping and adjustable seat. Operator's cab is right semi-mounted, equipped with
LCD monitor for display of crane various motions.
| Dimension | Unit | QY20B.5II |
| Overall length | mm | 12990 |
| Overall width | mm | 2500 |
| Overall height | mm | 3430 |
| Wheel base | mm | 4425+1350 |
| Weight | ||
| Total weight in travel | kg | 29000 |
| Front axle load | kg | 7000 |
| Rear axle load | kg | 25400 |
| Power | ||
| Engine model | SC8DK260Q3 | |
| Engine rated power | kW/(r/min) | 192/2200 |
| Engine rated torque | N.m/(r/min) | 1000/1400 |
| Travel | ||
| Max. travel speed | km/h | 75 |
| Min. travel speed | km/h | 2.5-3 |
| Min. turning diameter | m | 20 |
| Min. ground clearance | mm | 272 |
| Approach angle | ° | 16 |
| Departure angle | ° | 13 |
| Max. grade ability | % | 30 |
| Brake distance | m | 10 |
| Fuel consumption for 100km | L | ≈40 |
| Main performance | ||
| Max. rated total lifting capacity | t | 25 |
| Min. rated working radius | mm | 3000 |
| Turning radius at turntable tail | m | 3.370 |
| Max. lifting torque | kN.m | 1010 |
| Base boom | m | 10.85 |
| Fully extended boom | m | 34.19 |
| Fully extended boom+jib | m | 42.3 |
| Longitudinal outrigger span | m | 5 |
| Lateral outrigger span | m | 6 |
