The KDSG-01-08H spreader produced by our company is a high-efficiency, large-capacity spreader developed by our company based on many years of experience in the research and development of snow removal equipment and targeted at snowfall areas in my country, especially in alpine and high latitude areas; spreader With a volume of 8m3, the spreader has a large capacity and is suitable for long-distance spreading. The spreading width is 1.2-12m, meeting the needs of 3-lane urban expressways, ring roads, main city streets, highways, and expressways.
Adaptation chassis
This series of spreaders can be installed on various types of dump or truck chassis weighing more than 16 tons. In order to ensure the use effect, it is recommended that the chassis be equipped with a full-power power take-off.
Product advantages
1. The vehicle-mounted hydraulic drive has an extremely low failure rate, which solves the problem that the auxiliary engine model cannot start normally in severe cold temperatures, and the operating performance is more stable;2. Steel crawler material conveying structure, no jamming, no slipping, more accurate material conveying
3. Multi-functional spreading system, fully intelligent operation, making snow melt spreading more convenient and simple;
4. The spreader accessories are fully equipped to meet the needs of different working conditions;
5. The electrostatic spraying process on the surface of the spreader has good anti-corrosion effect, and the service life of the silo is more than 1.5 times that of similar products;
6. Have a complete test platform to ensure equipment performance.
Main technical parameters of the product
| Product model | DHSG-01-08H |
| Silo volume(m3) | 8 |
| Working speed(km/h) | 40 |
| Spread width(m) | 1.2-12 |
| Spreading direction | Spread in left, middle, right or three directions at the same time |
| Working efficiency(m2/h) | 480000 |
| Silo dimensions(mm) | 3657×2120×1626 |
| Install length(mm) | 4000 |
| Silo steel plate thickness(mm) | 4 |
| Reinforcement ribs(pcs) | 10 |
| Material conveying form | Steel tracks |
| Effective track width(mm) | 450 |
