ENSIGN Heavy Industries sell made in China 220HP farm tractor model YX2204-N
Specification of ENSIGN Tractors YX2204-N
Upgraded Performance
DOUBLE STRONG PRESSURE LIFTER
Lifting force is increased by strengthening and thickening the lift cylinders, that makes suitable for lifting large implements with higher reliability and better stability.
ELECTRIC CONTROL LIFTER&QUICK HITCH
Electric hydraulic lifter & quick hitch are as standard configuration, which end ow the operation easily and high efficiency.
TRACTION DEVICE
Equipped with an adjustable rear towing device, which is suitable for a variety of implements and trailers, and has a wide range of uses.
MULTICHANNEL OUTPUT
Equipped with 4 hydraulic outputs as standard, and multiple hydraulic outputs optional.
Advanced Technology
WATERPROOF AND DUST-PROOF CONNECTORS
The whole vehicle harness is equipped with waterproof and dust- proof connectors to ensure the stable operation and reliability improvement of the electrical system.
REASONABLE PIPELINE LAYOUT
The design of the pipeline direction is reasonable and the appearance is more beautiful.
LIFTING STEERING SHARING OIL SYSTEM
Lifting and steering adopted a sharing oil system, independent hydraulic oil tank. The inlet and outlet oil pipes of lifting cylinder are connected directly with the advantage of fast lifting and falling, and the work efficiency is improved.
24-DEGREE CONE SEALING TECHNOLOGY
Hydraulic pipelines are sealed by international leading 24- degree con e sealing technology and have the same structure as construction machinery with good pipeline sealing performance and high reliability.
SHOCK ABSORBING SYSTEM
Adopting the reinforced shock absorption system of construction machinery, having small vibration of the whole machine and low noise.
Strong Power
ENGINE
Equipped with Electronically controlled high- pressure common-rail engines, having advanced performance, strong power and high economic benefits.
Power emission and performance upgraded, fuel consumption lower, reliability higher, and technology more advanced.
AIR FILTER
Sand filter is standard configuration, with good filtering effect and high cleanliness of the air intake system to avoid wear of the four accessories, Filtering effect reaches 98%.
15-INCH REINFORCED CLUTCH
15- inch reinforced double- acting clutch, using imported friction plates and torque shock absorbers, the torque reserve is increased to more than 2.0, and the power is strong.
LARGE FUEL TANK
Adopting large 480L fuel tank, it can work continuously for more than 15 hours after a single refueling, and the endurance time is increased by 60%.
Heat dissipation system
RADIATING DEVICES
Both transmission and hydraulic systems are equipped with radiating devices to enable stable operation g without high temperature in continuous work.
SHARED COOLING DEVICE
Developing a shared cooling device for hydraulic and steering systems to effectively extend the service life of hydraulic core components (cylinders, pumps, valves) and improve the reliability of hydraulic seals.
NEW STRUCTURE COOLING SYSTEM
New structure cooling system having simple structure, convenient maintenance and cleaning, and strong heat dissipation capability.
Comfortable Driving
AIR-CONDITIONING CAB
Having good tightness and reversing image and GPS positioning system. The cab is raised as a whole, and the vision of the whole machine is better.
SHOCK-ABSORBING LUXURY SEAT
It can reduce the bumpy feeling during operation and is comfortable to drive.
FULL LCD COMBINATION INSTRUMENT
Monitoring the working state of the whole vehicle at any time, more accurate data, more obvious function, and reliability improved.
24V ELECTRICAL SYSTEM
Using 24V electrical system, with preheating function, good start- up performance, ensuring the normal start- up in low temperature environment, more suitable for cold areas.
Newly Upgraded Chassis
LENGTHENED WHEELBASE
it's wheelbase extended by 100mm, better traction force of the whole machine
DOUBLE SIDE PLATES
To ensure the reliability of deep loosening and deep ploughing operations on large farms and improve performance.
REAR WHEEL TRACK ADOPTS STEPLESS
Rear wheel track adopts stepless adjustment method, Which suitable for any ridge distance operation.
ENLARGED BRAKES
Enlarged strengthened brakes, high gear strength, good braking performance, safe driving and higher reliability.
Efficient Operation
LARGE STEERING ANGLE
Steering angle up to 45°, turning radius less than 7m, turning time saved by 20%, working efficiently without leaving corners.
CARRARO FRONT DRIVE AXLE
Carraro front drive axle is equipped at option to improve the strength and make the performance more reliable.
THE CLUTCH CONTROL AND ADJUSTMENT IS EXTERNAL
The clutch control and adjustment is external, and convenient to do adjusting to ensure the clutch operation reliable , failures declined and time saved.
| Model No. | YX2004-N | YX2204-N | YX2404-N |
| Drive Type | 4WD | 4WD | 4WD |
| PARAMETERS | |||
| Overall Size(LxWxH,mm) | 5800×2650×3160 | 5800×2650×3160 | 5800×2650×3160 |
| Minimum operation mass(kg,with cab) | 7800 | 7800 | 7800 |
| Wheel base(mm) | 2930 | 2930 | 2930 |
| Front wheel track (mm) | 1720.1820.2050.2100 | 1720.1820.2050.2100 | 1720. 1820,2050,2100 |
| Rear wheel track (mm) | 1680-2380/2380 | 1680-2380/2380 | 1680-2380/2380 |
| Min ground clearance(mm) | 465 | 465 | 465 |
| Mini turning radius(m) | 6.4±0.3 | 6.4±0.3 | 6.4±0.3 |
| Max Speed(km/h) | 32.94 | 32.94 | 32.94 |
| Max traction force(kN) | ≥69.6 | ≥69.6 | ≥69.6 |
| Tire specification (F/R) | 16.9-28/20.8-38( Double tire optional) 18.4-26/18.4-42( Double tire optional) 420/85R28/520/85R38 480/70R28/580/70R38 540/65R28/650/65R38 540/65R30/650/65R42 | ||
| ENGINE Model/Emission | Shangchai/CN III | ||
| Model No. | SC7H200G3 | SC7H220G3 | SC7H240G3 |
| Engine type | Vertical. Direct injection, four-stroke | ||
| Max torque (N.m) @ engine speed(rpm) | 830/1400±100 | 860/1400±100 | 880/1400±100 |
| Air intake type | Turbo intercooler | ||
| No. of cylinders/ Displacement(L) | 6/6.44 | 6/6.44 | 6/6.44 |
| Rated power(kW) | 147 | 162 | 177 |
| Rated speed(r/min) | 2200 | 2200 | 2200 |
| Air filter Type | Dry | Dry | Dry |
| Fuel tank capacity(L) | 450 | 450 | 450 |
| TRANSMISSION SYSTEM | |||
| Clutch | Dry, Independent Double-action | ||
| No. of Gears | 16F+16R | ||
| Shift type | Synchronizer | ||
| HYDRAULIC SYSTEM | |||
| Hydraulic output flow rate(L/ Min) | 92.4 | 92.4 | 92.4 |
| Hydraulic output valve | 3/4/5groups | ||
| BRAKING AND STEERING | |||
| Lifter | Higher pressure lifter | ||
| Lift control | Electrical control lifter( optional) | ||
| 3 point linkage | catagory.3/ quick hitch | catagory.3/ quick hitch | catagory.3/ quick hitch |
| PTO speed (rpm) | 540/1000 optional:760/850, 760/1000 | ||
| PTO spline number | 6.8,21(optional) | ||
| PTO power(kW) | ≥125 | ≥137.7 | ≥150.5 |
| Lifting Force (kN) | ≥42.5 | ≥42.5 | ≥42.5 |
| Tillage depth adjustment | Position control , floating control | ||
| BRAKING AND STEERING | |||
| Airbrake | Optional | ||
| Braking system | Wet, Disk type brake , mechanical control | ||
| Steering type | Full hydroulic system | ||
Ensign Heavy Industries Co., Ltd. It is a large machinery manufacturing enterprise, professional in the R&D and production of agricultural machinery tractors, construction machinery wheel loaders and industrial vehicles forklift trucks. The company has world-leading technology R&D centers, fully functional manufacturing centers and also has built a supporting industrial park with complete facilities. The company has ISO9001 Quality Management System, ISO45001 Occupational Health and Safety Management System, ISO14001 Environmental Management System and other qualification certification.
Ensign Heavy Industries has an excellent technical R&D team. Combining with the advanced manufacturing concept at home and abroad, fully utilizing the first-class production equipment and technology, it mainly produces a full range of 40Hp-220Hp tractors with various functional configurations to meet the users' different requirements in modern agriculture production.
