22018-30303(CN-2)
Stainless Steel
Phosphating
Non-Customized
Standard
Forklift Mast Side Roller
Genuine Forklift Parts Maker
Cost-Effective OEM Forklift Parts
High Quality Forklift Parts
Leading Forklift Parts
Inside PVC Bag, Outside Carton
12*12*12
China
8431209000
Product Description
Product Title: Forklift parts mast bearing manufacturer forklift mast side roller
Product Model: Forklift mast side roller 22018-30303(CN-2)
Below are related spare parts:
Forklift Mast Side Roller
Forklift mast side roller is mounting bearing with two holes respectively located on the protruding blocks on both sides.
Forklift Mast Roller Bearing Maintenance
Forklift mast rollers bearing are mounted with longitudinal rollers and side gears between the inner mast and the outer mast and on the outer wall of the forklift. Forklift mast systems also use integrated rollers with longitudinal and lateral rollers mounted on a support base.
If the diameter of the mast roller bearing is greater than 1mm, it should be replaced. After the mast rollers are assembled, they should move smoothly without blocking. The gap between the side rollers and the mast guide surface should not be less than 0.3mm.
Product Model: Forklift mast side roller 22018-30303(CN-2)
Below are related spare parts:
| Item | Description |
| Product Name | Forklift mast side roller (With surface phosphating treatment) |
| P/N | 22018-30303(CN-2) |
| Applied Model | For Heli forklift 1-1.8T |
| Net Weight (kg) | 0.5 |
| Gross Weight (kg) | 1 |
| Qty per Carton | 1 |
| Carton Size (cm) | 12*12*12 |
Forklift Mast Side Roller
Forklift mast side roller is mounting bearing with two holes respectively located on the protruding blocks on both sides.
Forklift Mast Roller Bearing Maintenance
Forklift mast rollers bearing are mounted with longitudinal rollers and side gears between the inner mast and the outer mast and on the outer wall of the forklift. Forklift mast systems also use integrated rollers with longitudinal and lateral rollers mounted on a support base.
If the diameter of the mast roller bearing is greater than 1mm, it should be replaced. After the mast rollers are assembled, they should move smoothly without blocking. The gap between the side rollers and the mast guide surface should not be less than 0.3mm.
