FB80
1 Year or 2000 Working Hours Which Ever Comes Firs
1 Year / 2000 Working Hours
Not Adjustable
Electric Forklift
AC Motor
1T - 5T
Electric
500mm
3000~5000mm
New
Chinese Battery
Could Be Designed by Buyer
Solid Tires, Side Shift, Three Stage Mast, etc
Paper Roll Clamp, Bale Clamp, Crane. etc
TDER
Export Package
3780*2200*2600 mm
China
8427109000
Product Description
| 1 | Model | FB80 | FB100 | FB120 | |
| 2 | Rated Capacity | kg | 8000 | 10000 | 12000 |
| 3 | Load Centre | mm | 600 | 600 | 600 |
| 4 | Lift Height | mm | 3000 | 3000 | 3000 |
| 5 | Fork Size (L×W×T) | mm | 1220×150×70 | 1220×175×85 | 1220×175×85 |
| 6 | Mast Tilt Angle F/R (α°/β°) | Deg | 6/10 | 6/10 | 6/10 |
| 7 | Length to face of fork (Without fork) | mm | 3780 | 4415 | 4415 |
| 8 | Overall Width | mm | 2200 | 2250 | 2250 |
| 9 | Mast Lowered Height | mm | 2600 | 2830 | 2830 |
| 10 | Mast Extended Height (With backrest) | mm | 4400 | 4260 | 4260 |
| 11 | Overhead Guard Height | mm | 2500 | 2640 | 2640 |
| 12 | Turning Radius (outside) | mm | 3350 | 3850 | 3850 |
| 13 | Front Overhang (Wheel center to fork face) | mm | 685 | 845 | 845 |
| 14 | Tread (Front/Rear) | mm | 1650/1718 | 1736/1754 | 1736/1754 |
| 15 | Ground Clearance (Bottom of mast) | mm | 200 | 230 | 230 |
| 16 | Wheelbase | mm | 2450 | 2850 | 2850 |
| 17 | Fork Spread (Min./Max) | mm | 300/2000 | 515/2055 | 515/2055 |
| 18 | Travel Speed | km/h | 14 | 14 | 14 |
| 19 | Lifting Speed (Full load) | mm/s | 300 | 280 | 280 |
| 20 | Max. Gradeability | % | 10 | 10 | 10 |
| 21 | Service Weight | kg | 12780 | 14800 | 15800 |
| 22 | Front Tire | 9.00-16-14PR | 9.00-20-14PR | 9.00-20 | |
| 23 | Rear Tire | 8.25-15-14PR | 8.25-20-14PR | 8.25-20 | |
| 24 | Driven Motor | kw | 14×2 | 14×2 | 14×2 |
| 25 | Lift Motor | kw | 25×2 | 25×2 | 25×2 |
| 26 | Battery Standard | V/Ah | 80/1150 | 96/1250 | 96/1250 |
| 27 | Controller Manufacturer | CURTIS AC | CURTIS AC | CURTIS AC | |
| 28 | Operating Pressure for Attachment | Mpa | 18 | 18 | 18 |
Features
1.simple appearance
The flowing outline of the truck chassis and the exposed application parts of metal materials make people shine. This forklift is light in weight, small in size, simple and elegant.
2.reliable stability
üAdvanced parallel layout of drive motor and lower located battery up to chassis bottom provide good stability to the truck.
üLow center of gravity provides good turning stability,
3.Secure safety equipment
ü Regenerative braking, reverse current braking and anti-slide on slop function guarantee the operation safety.
ü Equipped a water cooling system with a good heat dissipation effect is used on a new energy forklift for the first time, so that the forklift can carry out long-time and high-intensity operations
4.Environment protecting
üLow noise, no exhaust emission, and low energy consumption, all meet environment friendly requirement.
1.simple appearance
The flowing outline of the truck chassis and the exposed application parts of metal materials make people shine. This forklift is light in weight, small in size, simple and elegant.
2.reliable stability
üAdvanced parallel layout of drive motor and lower located battery up to chassis bottom provide good stability to the truck.
üLow center of gravity provides good turning stability,
3.Secure safety equipment
ü Regenerative braking, reverse current braking and anti-slide on slop function guarantee the operation safety.
ü Equipped a water cooling system with a good heat dissipation effect is used on a new energy forklift for the first time, so that the forklift can carry out long-time and high-intensity operations
4.Environment protecting
üLow noise, no exhaust emission, and low energy consumption, all meet environment friendly requirement.
FAQ:1.What Certificate do you have?
TDER workshop meet with the ISO9001:2008 Quality System.
All of our products with CE certificate. Some of our products meets the EPA requirements.
2.Can you customize and design as the clients' requirement?
TDER will try its best to meet all kinds of clients' special requirements.
However, All the customizing and refit should be implemented safely and scientifically.
The colors can be painted as client's need.
3.How long is the warranty of your products?
Normally 1 year or 2000 working hours whichever occurs first.
Details to see the TDER warranty policy for each model.
4.Can you produce the products labeled with the client's brand?
With the authorization of the brand, we can OEM for our clients.
5.What payment terms do you accept?
On T/T term 30% down payment is required in advance,and 70% balance shall be settled before shipment.
6.What logistics way we can work for shipment ?
We can ship construction machinery by various transportation tools.
1.For 90% of our shipment,we will go by sea,to all main continents such as South America,Middle East,
Africa,Oceania and Europe etc,either by container or Bulk shipment.
2.For neighborhood countries of China,such as Russia,Mongolia, Kazakhstan,Uzbekistan etc., we can ship
trucksby railway.
3.For light spare parts in urgent demand,we can ship it by international courier service,such as DHL,TNT,
UPS,or Fedex.
7.Delivery time:
Standard configuration products are always in stock. The production period of Customizing products is from
7 days to 60 days.
