We are a factory and support customization!!!
Dezhou Chuanatao Mechanical and Electrical Eauipment Co.Ltdwas established in 2015 focusing on the research and de velopment and production of heating and cooling equip ment. At present we mainly produce parking heatersparking ain conditioners,parking generators, solar air conditioners,solar refrigerators.We always adhere to the business philoso phy of quality first win-win cooperationand hope to exchange and co-operate with friends from all over the world.Due to qood quali-tycompetitive price professional technical suppol and good serviceOur products are sold to more than twenty countries.(Pakistan,Nigeria,Canada,Costa-Rica,Cyprus,Mozambique,Turkey,ThailandPhilippines,Belgium,Indone sia,Cze)
| Voltage | 12V/24V/220V | heating power | 5KW |
| fuel consumption | 0.11-0.5L/H | fuel | diesel |
| power consumption | 13-42W | air flow | 120-190 |
this parking heater uses diesel as the fuel, after heating the exchange hot air through the air blower, arrives to the compartment, storehouse equipment, therefore achieve the purpose that heats and removes the frost to them.
important hint:
After the heater is installed for the first time, it should be turned on several times in order to completely remove the air in the fuel supply system and fill the fuel pipe with fuel
This parking heater uses diesel as the fuel, after heating the exchange hot air through the air blower, arrives to the compartment, storehouse equipment, therefore achieve the purpose that heats and removes the frost to them.The parking heater is an on-board heating device independent of the car engine, and has its own fuel line, circuit, combustion heating device and control device. The engine and cab of a car parked in a cold and cold environment in winter can be warmed up without starting the engine.Our products are perfect for all automotive applications. For example, heating the interior spaces of tents, RVs and boats.
Parking heater is an on-board heating device independent of automobile engine, with its own fuel line, circuit, combustion heating
can be preheated and heated. Completely eliminate the cold start wear of the car.
The parking heater is an on-board heating device independent of the car engine, and has its own fuel pipeline, circuit, combustion heating device and control device, etc. It can preheat and heat up the engine and cab of a car parked in a low temperature and cold environment in winter without starting the engine. Completely eliminate the cold start wear of the car.
Clean the parking heater regularly. In summer, the temperature is high and the air humidity is high, which will easily lead to corrosion and water accumulation inside the parking heater, which will affect its normal operation. Therefore, car owners need to regularly disassemble the parking heater for cleaning, remove the dirt and scale, and keep the interior clean and dry. At the same time, also pay attention to cleaning the air inlet and outlet of the parking heater to ensure that it is unobstructed.
1: After the heater is installed for the first time, it should be turned on several times in order to completely remove the air in the fuel supply system and fill the fuel pipe with fuel
2: The heater should be tested before use. During the trial run, carefully check all connections for leaks and safety conditions. If there is thick smoke emission, abnormal combustion noise or fuel smell, the heater should be turned off and the fuse should be disconnected so that it cannot operate. It can only be used after being overhauled by professionals
3: Before each heating season, an inspection must be carried out by qualified professionals, and the following maintenance work should be carried out: check whether there is pollution and foreign objects in the air inlet and outlet; clean the outside of the heater; check whether there is rust and looseness in the circuit joints ; Check whether the intake pipe and exhaust pipe are blocked or damaged; check whether there is any leakage in the fuel pipe
4: When the heater is not used for a long time, it should be run once every 4 weeks, each time for about 10 minutes, the oil pump and combustion air fan, etc. to prevent the machine and components from malfunctioning (solid death)
5: The air inlet and outlet of the heater must be kept free from blockage and dirt, so that the warm air duct is unobstructed to prevent overheating failure
6: When replacing low-temperature fuel, the heater should be operated for at least 15 minutes to inject new oil into the fuel pipeline and fuel pump
7: When welding the car, the positive line of the heater's power supply should be removed from the battery and grounded to prevent damage to the controller.
8: During the transportation and storage of the heater, the ambient temperature should not exceed -40°C~-85°C to prevent damage to electronic components.
