Truck and Trailer Ratchet Cargo Lashing Strap

Detailed specification


 
 

Item No.		HRL0525C	HRL0525B	HRL0525
Specification		1-1/1"*15'	1-1/1"*15'	1-1/1"*15'
Braking Strength		3000lbs	4000lbs	6000lbs
Sets per carton		24pcs	24pcs	24pcs
Dimension of carton		42*37*34	40*38*39	40*38*39
G.W/N.W (kgs)		15/14	17/16	17/16

 About us
 
Since 2001, we have been specializing in the field of Lashing Equipment and Lifting Equipment. Our main products are Cargo Lashings, Webbing Slings
 
and Round Slings, etc. In the meantime, we timely develop new products in relevant field to meet market demands, such as Cargo Nets, Edge Protectors
 
and Safety Harness, etc.
 
All products are produced under strict standard of quality control, and constant research and development ensuring that you will get the latest products
 
produced with the most advanced and cost effective technologies. Most of our products are CE and GS certified. We are confident that our products and
 
service will satisfy the highest standards of requirements.
 

 Features:
This ratchet cargo lashings are used for securing truck loads, tying down loads while transporting, shifting or moving them. They have replaced traditional jute ropes, chains and wires used for transportion and for a vairety of other applications securing truck loads. The use of cargo lashings can reduce the chance of load 
damage and also protect other traffic party.
The main advantage of ratchet cargo lashings are:
* Load restrain using a tension device(ratchet)
* Effective and safe control of loads during transportation
* Extremely quick and efficient tie down and release the load thus saving time
* No damage to the load being tied down
 
Warning:
* Not for lifting!
* Only trained and authorized persons are permitted to use the ratchet tie down. 
* Working Temperature: - 40°C to + 120°C for polyester (PES).
 
Caution:
1. Do not exceed the lashing capacity indicated by the manufacturer! In the case of improper use, the transported articles can not be secured correctly and may cause damages.
2. Protect the webbing against sharp edges!
3. Examine the wear or damages of the web lashing before each use. If any wear and damages at the webbing or damages at the metal parts, do not use the ratchet tie down any longer.
4. Make sure the webbing is fitted without twists and in such a way that may influence the rated lashing capacity, otherwise it may cause damages.