Model NO.
AN510
After-sales Service
Yes
Certification
ISO, ISO
Warranty
12 Months, 1 Year
Output Type
Single
Output Power
>500W
Modulation System
PWM
Brand
Ainuo
After-Sales Service
Provide After-Sales Service
It Can Simulate The Output Characteristi
Accurate Voltage and Current Test
Sequence Output
It Can Test The Operating Voltage Range of Photovo
Trademark
Ainuo
Transport Package
Wooden Case
Specification
429*132*640
Origin
Jinan
Product Description
The AN510S(F)series solar cell simulation power supply is an well-designed, compact, high performance, powerful and easy-to-operate DC programmable power supply with I-V simulation curve, which is responsive, controllable, repeatable, stable and accurate, with built-in SAS model for setting of Voc, Isc, Vmp and Imp parameters to generate and output I-V curve. Moreover, solar cell parameters or a series of 1024 points of V&I data can be edited via the PC software and then downloaded to the power supply, high-power, small size, fast transient response, low ripple, high precision, good performance, with standards reaching the international advanced level.
Detailed Photos
Voltage output: 0-300V & 600V & 1000V.
3U15kw high power density, high power parallel operation and up to 1MW.
Solar cell I-V curve simulation
Simulate a variety of solar cell output characteristics (Fill Factor)
I-V curve can be simulated under different temperature and illumination conditions.
Test the Maximum Power Point Tracking (MPPT) ability and efficiency.
Accurate voltage and current measurement.
Serial output can be set to test the PV inverter operating voltage range.
Standard RS232 port.
Standard graphical PC operating software. Single operation available.
High-brightness dot matrix VFD display.
Product Parameters
| Model | AN51005-300S(F) | AN51010-300S(F) | AN51015-300S(F) | AN51005-600S(F) | AN51010-600S(F) | AN51015-600S(F) | AN51005-1000S(F) | AN51010-1000S(F) | AN51015-1000S(F) | |
| Input | 3-phase 3-wire,380V±38V,47Hz~63Hz | |||||||||
| Output | Voltage | 0V-300V | 0V-600V | 0V-1000V | ||||||
| Current | 0-16A | 0-33A | 0-50A | 0-8A | 0-17A | 0-25A | 0-5A | 0-10A | 0-15A | |
| Power | 0-5kw | 0-10kw | 0-15kw | 0-5kw | 0-10kw | 0-15kw | 0-5kw | 0-10kw | 0-15kw | |
| Accuracy | Voltage | ≤±0.15%F.S,Resolution:0.01V | ≤±0.3%F.S,Resolution:0.01V | |||||||
| Current | ≤±0.4%F.S,Resolution:0.01A | ≤±0.4%F.S, Resolution:0.01A | ||||||||
| Ripple and Noise 20Hz-20MHz | Vrms | 50mV | 60mV | 1950mV | ||||||
| Vpp | 300mV | 350mV | 2550mV | |||||||
| Source effect | Voltage: ± 0.01% F.S Current: ±0.05% F.S (380VAC±10% Input,same load) | |||||||||
| Load effect | Voltage: ± 0.02% F.S Current: ±0.1% F.S (380VAC±10% Input,same load) | |||||||||
| Protection | Input phase loss protection, output overvoltage, overheat, short circuit protection | |||||||||
| Transient response time | 1ms | |||||||||
| Max output voltage drop compensation | 5%(40-100V),2%(>100V) | |||||||||
| Communication | RS232 | |||||||||
| Memory | 10 groups of memory storage, power down memory function | |||||||||
| Environment | Temperature:0~40ºC;Humidity:20~90%RH | |||||||||
| Dimension W×H×D(mm) | 429×132×610 | |||||||||
| Weight | 27kg | 32kg | 37kg | 27kg | 32kg | 37kg | 27kg | 32kg | 37kg | |
Company Profile
