Model NO.
JAS-11A
LPM
0-60L/min
Oil Outlet Caliber
15/16“
Type
Composite Fuel Nozzle
Item Name
Automatic Fuel Nozzle
Key Words
Fuel Nozzle
Original
Xuzhou
Certification
ISO
Pressure
0.18MPa
Size
4′′
Package
as Customer Requirement
MOQ
10
Transport Package
Carton
Specification
2′′
Trademark
jiasheng
Origin
China
Production Capacity
50000PCS/Month
After-sales Service:
1
Warranty:
2 Year
Self Closure Time:
0.3s
Original Automatic Fuel Dispenser Pump Nozzle
1. The oil gun needs no adjustment and lubrication, and can be installed and used after unpacking 2. When the oil gun is connected with the rubber hose joint, apply appropriate thread sealant on the external thread of the oil pipe or rotary joint 3. Insert the oil pipe into the inlet of the oil gun, connect the external thread and the oil gun, and tighten the oil pipe nut with moderate tightness to avoid damaging the oil gun 4. It is forbidden to use insulated raw tape for threaded connection during installation 5. Necessary tests shall be carried out before putting into use. The minimum flow after the trigger is put into gear shall be greater than 5 gallons per minute, and ensure that the oil gun can be self sealed in each gear
| Technical Specifical | |
| Working Pressure | 0.18Mpa |
| Auto Shut-off sensibility | 0.3 second |
| Inlet Size | 4'' |
| Flow Rate | 0-45L/min&0 - 60 L/min |
Send Message
