Portable 1.5A Smart Car Battery Charger /Maintainer, Car Battery Charger, Smart Battery Charger

FEATURES:
• The unit is designed for charging / maintaining a DC 12V/2-15Ah LEAD-ACID battery only
• Input: AC 120V, 60Hz, 0.4Amp
• Output: DC 12V, 1.5Amp
• For maintenance charging RVs, specialty vehicles, marine deep cycle batteries and more
• Built-in circuit protection guards against overcharging or short circuit
• Shockproof with strong ABS material and compact design
• Convenient, color-coded ring terminals for easy, correct installation
• Fully automatic: powers on when needed, powers off when battery is fully-charged or
topped-off
• LED charging indicator: (LED charge indicator changes from Red to Green as battery
reaches full charge) see Figure 1.
Red - connection correct and charging
Green - fully charged
• Power on indicator
• ETL-Listed for safetyFCC CLASS A PART 15 NOTIFICATION
The T onny Battery Charger / Maintainer has been designed and tested to comply with
FCC Class A part 15. These regulations are to provide adequate protection against harmful
interference while operated in a commercial application. If in a residential setting you
are encountering interference with TV and Radio reception. Simply remove AC from the
charger to if your battery charger is causing interference. End user c an explore the
following to minimize interference.
1. Chose a different AC circuit to power your Battery Charger / Maintainer
2. Make sure your outlet is properly grounded
3. Reposition receiving antenna
4. Purchase a separate AC line
5. Relocate charger so that it is at the furthest point from home receiving equipment (TV,
radio, etc.

Fully automatic on-board charger that reliably maintains charge of 12-volt battery
Provides a 1.5-amp maintenance charge
Keeps battery properly charged for sure starting and reliable power to lights and accessories
Water-resistant
short-circuit connection protection
reverse polarity protection
LED indicator reports the charging status