Model NO.
SL-BSD1
Voltage
12/24V
Support Format
None
Audio Output
Beep
Video Output
None
Active Speed
10km
Alert Range
3m-15m
Power
< 1W
Transport Package
White Box
Specification
radar
Trademark
OEM
Origin
China
Production Capacity
1000PCS /Month
Warranty:
2 Years
Screen Size:
Yellow LED
Resolution:
1
Combination:
Buzzer
Placement:
Dashboard
Certification:
CE, RoHS, FCC
Now this product can install car,truck , VAN and almost of vehicles...
BSD(Blind Spot Detection) System: BSD warn the driver against collisions that may occur due to a lane change manoeuvre. BSD are intended to supplement the vehicle's interior and exterior rear-view mirrors. BSD are intended to detect vehicles to the rear and sides of the subject vehicle (see Figure). When the subject vehicle driver indicates the desire to make a lane change, the system evaluates the situation and warns the driver if a lane change is not recommended. The system will not take any automatic action to prevent possible collisions. Responsibility for the safe operation of the vehicle remains with the driver.
Features:
1. After starting the vehicle, BSD system would start-up.
2. The BSD system could be closed or opened through the exterior switch.
3. BSD system could receive the information via CAN_BUS(eg. Speed, turn lights,etc.)
4.Range :Both side>3m ;Behind >15m
5. Motion object distance judgment function;
6. Relative speed judgment function;
7. Lane change warning function
8. LED light will turn on when there is vehicle in blind spot
9. LED light will blink and the buzzer will alarm when the turn light is on and there is vehicle in blind spot
BSD(Blind Spot Detection) System: BSD warn the driver against collisions that may occur due to a lane change manoeuvre. BSD are intended to supplement the vehicle's interior and exterior rear-view mirrors. BSD are intended to detect vehicles to the rear and sides of the subject vehicle (see Figure). When the subject vehicle driver indicates the desire to make a lane change, the system evaluates the situation and warns the driver if a lane change is not recommended. The system will not take any automatic action to prevent possible collisions. Responsibility for the safe operation of the vehicle remains with the driver.
Features:
1. After starting the vehicle, BSD system would start-up.
2. The BSD system could be closed or opened through the exterior switch.
3. BSD system could receive the information via CAN_BUS(eg. Speed, turn lights,etc.)
4.Range :Both side>3m ;Behind >15m
5. Motion object distance judgment function;
6. Relative speed judgment function;
7. Lane change warning function
8. LED light will turn on when there is vehicle in blind spot
9. LED light will blink and the buzzer will alarm when the turn light is on and there is vehicle in blind spot
| Radar sensor spec | |
| radar working frequency | 76Ghz-77Ghz |
| detection width | 3.5m |
| detection distance | 70m |
| detection degree | 150 degree horizontal |
| refresh rate | 20Hz |
| detection distance acuracy | 0.75m |
| detection distance error | '+-1 meter |
| detection relative speed error | +-0.25m/s |
| working voltage | 9-30V |
| working current | <700mA@12V |
| working temperature | '-40~85 centigrade |
Send Message
