TK408 GPS Motorcycle/vehicle tracker is the cost-effective solution for security & real-time tracking. It is specially used for motorcycle/car tracking because of its compact size and water-proof design. It's plug and play design. Easy to install.
Features:
1. Track on command or by time interval via SMS/GPRS;
2. Arm/disarm by SMS or phone call.
3. Check the car's real physical address (such as city name, street name.);
4. Track by mobile SMS to get the latitude, longitude, speed, direction & odometer etc.
5. Check the location directly by the Google map's URL;
6. Data logger to store 5520 waypoints.
7. Online tracking by website;
8. Odometer function;
9. Over-speed alarm, Movement alarm, Engine on alarm, Vibration alarm;
10. Turn over alarm;
11. Acceleration & Deceleration (Crash) Alarm;
12. OTA function: Upgrade firmware remotely on air;
13. Smart engine ON/OFF status detection without wiring to ACC;
14. Built-in rechargeable backup battery; when the car battery is cut off or low enough, the system will send out power failure alarm immediately;
15. Cut off engine to stop the car safely by SMS/GPRS;
16. Routine optimization when vehicle turns a corner;
17. A-GPS function to get GPS signal much faster;
18. Support USB configure;
19. Wide working voltage range, from 10V-90VDC, suitable for motorcycle, car or big truck.
20. Reliable design of framework with hardware watchdog.
21. Detection on internal battery's volume & vehicle battery's voltage.
22. Support active RFID Driver ID identification (optional)
23. Support wireless immobilizer (optional)
24. Plug & play, easy installation.
Specifications:
Size of the main unit: | 52*38*26 (mm) |
| Weight of the main unit | 55G |
| Inside Backup battery: | Rechargeable 3.7V 350mAh Li-ion battery |
| Working temperature: | -20~85 centigrade |
| Humidity: | 0~95% |
| GSM frequencies: | Quad-band: 2G: 850MHz/900MHz/1800MHz/1900MHz 4G: LTE-FDD:B1/B3/B5/B7/B8/B20/B28 LTE-TDD:B38/B40/B41 |
| Working frequencies: | 1575.42MHz C/A(GPS) |
| Receiving sensibility: | -162dBm |
| Positioning accuracy: | ≤10m(wide-open area) |
| Speed accuracy: | ≤0.1M/S(wide-open area) |
| Positioning mode | Auto 2D/3D |
| Working voltage: | +10 ~+90VDC/1.5A |
| GPS Position time: | Cold start: 40 seconds Warm start: 20 seconds |
GPS Tracking Software:
OBD code report:
GPS Alarm report:
Q&A:
Q: How does the alarm function work?
A: The device is tracker, alarm and diagnostic tool. If someone tries to tamper vehicle, the device will send alert SMS to owner and send alert to software.
Q: When does the device send alarm.
A: Device sends alarm when vehicle is being vibrated/moved, engine is started or device is powered off/disconnected illeagally.
Q: Can I add more than one RFID tag to each tracker?
A: Yes.
Q: Does the RFID tag have a battery? How long will it last?
A: Yes the RFID tag has battery inside. It'll last at least 1 year. And it can be easily replaced.
Q: What's the range/distance between the tracker and RFID tag?
A: The range between the tracker and RFID tag is 3 meters to 5 meters.
Q: What are the functions of the RFID tag.
A: The RFID tag has 2 functions.
1. To arm/disarm the OBD unit. When RFID tag get close to the tracker, the tracker will be disarmed automatically. When RFID tag is away from tracker, tracker will be armed automatically.
2. To manage different drivers' information.
Each RFID tag has an ID. Every time the driver bring the tag close to the tracker, and start car, the tag's ID will be sent to platform, so you can know who is driving the vehicle, and how long he has being driving the vehicle.
Send Message
