Model NO.
VT-CCL006
Type
Door Light
Base
C5W
Resistance
Waterproof
Product Description:
1. LED: 1 high power LEDs(3W/LED)
2. Color: White
3. Lamp Base Material: Aluminum
4. Accessories: 2 pieces/set, 2 wires/set, 2 Metal rings/set, 1 Bit/set, 1 Certificate of conformity, 1 Manual
5. LED is BridgeLux from America
6. Waterproof: Top IP67
7. Brightness: Highlight(3W)
8. Luminous Flux: 200-220lm
9. Light Angle: 90 Degree
10. Visual angle: 240 Degree
11. Lamp life: 30000H
12. Warranty: 1year
13. Smaller than Conventional version
Product Size: Diameter 29MM, Light barrel 24MM; Overall length 70MM
Box Size: 195X150X55MM
Carton Size: 610X315X460M
48 Sets/Box
* What is laser Logo welcome light?
With technology developing, laser lights have been installed into more and more vehicles. It is munufactured by laser and optical high technology. Once installed into the car, this welcome light will be displayed on the ground when the car door is opened, just like welcoming the guests. It seems like both the guests and owner are being given more respect by the brand car. When the car door is closed, the logo light disappears.
* How to install it into the car?
Installing laser Logo light is as easy as follows:
1. There are two wires should be connected to the wire of the original car lines. One is +12V wire, this wire should be connected to door side light or top light in car; The other wire is ground(-).
2. Open the door, remove the plastic door panels with the tools.
3. Choose the fit postiton to drill a hole, the size of hole should be the same as the lens of laser logo welcome light.
4. Fix the laser LOGO welcome light with screw tightly.
5. Check the light to see if it works properly or not. If the light doesn't work, please check the wire connection.
6. Fix the plastic door panels with the tools.
* How to work?
It works just on +12V. The Logo welcome light is displyed on the ground when car door is opened. It will disappear after the door is closed. You will find this light is so cool when you open the door! You also can show it off among your partner or friends, it will be given you more and more respect and applause.
* Attention:
1. We strongly suggest installing this product by professional automobile modification shop. The manufacturers disclaim all responsibility for belongings or personal casualty caused by improper installation.
2. Our company is not respnsible for the legality of installing this product. Before installation, cantact the vehicle management department for confirmation of filling.
3. Please access the power supply through voltage regulator rectifier. Do not directly access the car battery.
* Application:
Audi, BMW, VW, Mercedes-Benz, FIAT, Volvo, Ford, KIA, Hyundai, Nissan, Honda, Toyota, etc.
We also can make the effect as your design.
