12 cores sheathed cable :
Thick red wire: To 10-28V/DC (15A Fuse)
Thick black wire: Ground
Yellow wire: Flash pattern ,(to + 12VDC more than 1 second to next pattern, more than 3 seconds all lights steady on,Continuously to +12VDC 3 times , return first pattern .
White wire: To 10-28V/DC to turn on two white lights in middle in front row lights . second time ,the lights flash , third time turn off the two lights ,then the two lights work with all lights .
Thin red wire: Control front row lights To 10-28V/DC
Blue wire : Left arrow lights of rear row lights , To 10-28V/DC
Purple wire: Right arrow lights of rear row lights ,To 10-28V/DC (Lights go from center to both sides when blue wire and purple wires connect to 10-28V/DC together)
Brown wire: MODE 1, To 10-28V/DC
Orange wire : Control rear row lights to 10-28V/DC Green wire: MODE 2 (It is Prior to MODE1), To 10-28V/DC
Gray wire : Connect to 10-28V/DC first time to turn on both sides alley light , second time to connect 10-28V/DC , both alley lights flash ,third time connect to 10-28V/DC to turn off alley lights . then alley lights work with all lights .
Thin black wire : MODE 3 (It is prior to MODE1 and MODE2), To 10-28V/DC
Length of light :
Send Message
