Nox sensors are commonly used in pairs on catalytic converter. It's installed before DOC chamber and after SCR chamber to detect Nox contents level. TB offers OEM quality Nox sensors for replacements or repairs.
Nox particle level is measured with Nox sensors' special inner ceramic structure which made of ZrO2. The ceramic is often plated with platinum to create a voltage difference between the exhaust gas and atmosphere air due to the Oxygen percentage difference.
| Technical Information | |
| Test limit | Nox content 0-3000 ppm O2 density 0-21% |
| Nox detect accuracy | 0~100ppm:±10ppm 100ppm~500ppm:±10% 500ppm~1500ppm:±15% 1500ppm~3000ppm:±15% |
| O2 density accuracy | 0-5%±0.2% 5-21% ± 4% |
| Reaction speed | τ(33%~66%)NOx<1400ms τ(66%~33%)NOx<1400ms |
| Initiation time | 120 second |
| Working temperature | -40ºC-800ºC |
1. Industry certificate: IATF16949, CE;
2. Complete products, 99% of the world's models of oxygen sensors are produced, and there are more than 2,000 product models;
3. Master the core and check the quality from the source. The core components of the oxygen sensor, the zirconium tube and the chip core, are independently produced by our company, and the raw materials (zirconium powder, platinum paste, etc.) are imported raw materials, and adhere to the principle of quality first;
4. The inspection is fine, all products need to go through 100% inspection, the inspection items include: air tightness test, signal sensitivity test, engine simulation loading test, pressure test, salt spray test, etc., to ensure that each one is a high-quality product;
5. Senior technical team, we have Professor Xie Guangyuan Xie, a professor of materials science from Huazhong University of Science and Technology as the company's technical guide, and have long-term technical exchanges and cooperation with the automotive oxygen sensor research team of Wuhan University of Science and Technology. This industry is going more stable and farther;
6. A complete quality control system, we have high-end equipment for the production and manufacture of oxygen sensor products, and the level of automation equipment is the first in China;
7. The delivery time is short. Our current output of oxygen sensors is 60,000 pieces per month, which can meet the customer's order needs and provide timely and efficient supply capacity;
8. High-quality after-sales service, we have a professional technical and sales team to answer customers as soon as possible; with our more than ten years of production and sales experience, we have accumulated demand information for oxygen sensor products in various markets and possible For difficult problems, we can provide customers with solutions in a timely and accurate manner to maximize the interests of customers.
Q: Are you a trader or manufacturer?
A: We are OEM quality manufacturer. Our factory is in Tianmen City with over 20,000 sqm size. We provide online factory tour at current moment.
Q: Do you manufacturer sensor for XXXX car?
A: We offer sensors for most model on the market. Feel free to contact our sales person for more information.
Q: What is your delivery time?
A: Your order can be ready for shipping withing 3 days if we have it in stock. Otherwise it can take around 10-25 days depend on order quantity.
Q: How about the quality of your products?
A: The qualified rate is up to 99.6%. We have advanced testing equipment for components testing+semi-finished testing + 100% products testing before shipping. All the products meet the IATF16949 and IS09001 standard.
Q: Do you offer warranty?
A: We do our best to ensure our products are in good condition through logistics. But if it unfortunately damaged during shipping, we will for sure to compensate for another shipment or refund.
Q: What is the minimum order quantity?
A: Varies on product, but the total order cost should surpass $3000
Q: Do you manufacturer sensor for XXXX car?
A: We offer sensors for most model on the market. Feel free to contact our sales person for more information.
We use individually packing bubble wraps for each sensor to provide secure production for our product exporting and prevent any damage during the lengthy travel. We would pack certain numbers of parts in one box to prevent over crowd. The outer box is than filled with cushion to reduce collision inside the box. We provide either neutral packaging or customized packaging as you need.
Send Message
