Application:
Water heater, washing machine, boiler, electromagnetic water heater, water dispenser, water purifier, R.O. machine, U.F. machine, coffee machine, water machine, water machine control, water control machine, beer machine, beauty equipment, shower equipment, electrolytic water machine, energy engineering, heat pump,IC meter, steam equipment, irrigation equipment, water system, campus card self-service sale (sell) water machine, washing machine, automatic washing equipment, water treatment equipment, water dispensing equipment, cooling system, circulation system, intelligent toilet (toilet), bidet, mechanical equipment, heating equipment, Pharmaceutical (agents) equipment etc.
Calculation Formula: F(Hz)= 8.1*flow rate(Q)(l/min) ±10%
Features:
1. SUS304 body, SUS304 shaft, PA66 fibre glass nylon vane..
2. Intubation design of inlet and outlet pipe, easy connection and operation;
3. Imported Hall IC from Japan, stable and reliable;
4. Flow Range: see above
5. Working voltage: DC3.6-26.4V
6. Rated voltage and current: DC5V, no more than 10mA;
8. Pulse output duty cycle: 50+-10%
9. Insulation resistance: 100M Ohm and above;
10. Tightness: Seal up all the holes, and inflate with 1.7MPa water, after 1 minute, no leakage and deformation;
11. Max 100 centigrade;
12. Working Pressure: under 1.7Mpa;
13. Wire length: regular 32cm, other length can be tailor made against request.
15. End connection: SM2.54 Plug.
Note:
1. When magnetic material is close with the sensor,its characteristics may vary.
2. In order to avoid particle debris, the sensor must beinstalled after a filter.
3. The flow sensor installation has to avoid strong vibration and shaking of the environment, so as not to affect the sensor's measurement accuracy.
