Model NO.
3034572
Customized
Customized
Color
Silver White
Package
Carton Box
Warranty
1 Year
Stock
Yes
Size
Standard Size
Resistance
300 Ohms Maximum
Thread Size
5/8-18 Unf-2A
Transport Package
Netrual Carton Box
Specification
aluminum
Trademark
Yokden
Origin
Chongqing
HS Code
8503009090
Production Capacity
50000/Month
Type:
Piezoresistive
Output Signal Type:
Analog Output
Measuring Shaft Quantities:
Single
Accuracy Grade:
0.2G
IP Rating:
IP44
Certification:
ISO
3034572 high quality 5/8 tread size generator spare parts speed sensor
The 80mm Speed Sensor Magnetic Pickup 3034572
The magnetic speed sensor is mounted in the ring gear case or flywheel bell housing of the engine.
The threaded hole for the speed sensor should be perpendicular to the centerline of the crankshaft
and centered over the ring gear teeth.
A spot face should be present to provide a flat surface on which to anchor the locknut.With the engine stopped, screw the speed senor in until it touches a gear tooth, then back it out 3/4 of a turn and
secure it with the locknut. Any ferrous gear may be used as long as the frequency and amplitude of
the resulting signal meet the speed control unit specifications
The wire leads should be twisted for their entire length from the magnetic speed sensor to the control unit.
The leads may needshielding if they are longer than 10 ft. (3m), or if external interference is present.
Do not connect either of the speed sensor leads to anything but the speed control unit used.
The shield should not be magnetic sensor.
We also provide many other models of other sensors
1. SENSOR suitable for engines
2.Warranty time: 6 months to 1 year at least on the base of right using
3. Neutral packing or your desired packing
4. Hight quality, 100% factory tested before delivery
5. Competitive prices and timely delivery
6. Sample order accepted
7. Good after-sales servive
8. Continue to develope new products all the time
Why Choose Us
1 All of our Products has one-year guarantee
2 Has been specialized in generator parts for 10 years, we can offer customized service
3 We ave a big research department which has about 10 technicians, we can offer technical support
4 Cares about the quality, each products will be test before shipping.
The 80mm Speed Sensor Magnetic Pickup 3034572
The magnetic speed sensor is mounted in the ring gear case or flywheel bell housing of the engine.
The threaded hole for the speed sensor should be perpendicular to the centerline of the crankshaft
and centered over the ring gear teeth.
A spot face should be present to provide a flat surface on which to anchor the locknut.With the engine stopped, screw the speed senor in until it touches a gear tooth, then back it out 3/4 of a turn and
secure it with the locknut. Any ferrous gear may be used as long as the frequency and amplitude of
the resulting signal meet the speed control unit specifications
The wire leads should be twisted for their entire length from the magnetic speed sensor to the control unit.
The leads may needshielding if they are longer than 10 ft. (3m), or if external interference is present.
Do not connect either of the speed sensor leads to anything but the speed control unit used.
The shield should not be magnetic sensor.
| Item Name | Oil pressure sensor |
| P/N | 3034572 |
| Weight | 2kg/Pce |
| Advantage | In Stock |
| MOQ | 1 Pce |
We also provide many other models of other sensors
1. SENSOR suitable for engines
2.Warranty time: 6 months to 1 year at least on the base of right using
3. Neutral packing or your desired packing
4. Hight quality, 100% factory tested before delivery
5. Competitive prices and timely delivery
6. Sample order accepted
7. Good after-sales servive
8. Continue to develope new products all the time
Why Choose Us
1 All of our Products has one-year guarantee
2 Has been specialized in generator parts for 10 years, we can offer customized service
3 We ave a big research department which has about 10 technicians, we can offer technical support
4 Cares about the quality, each products will be test before shipping.
Send Message
