ISO V-4-20MA Series
>> Isolated power distribution and conversion on voltage signal from two-wire sensors.
>> Precision error grade: 0.1(non-isolation type), 0.2(isolation type)
>> Linear processing and long-wire compensation circuits inside (Non-linearity <0.05%).
>>Isolation between I/O: 3KVDC full isolation.
>> Range of the power supply to sensor:12-32VDC
>> Small input equivalent resistance,high linearity.
>> Small size IC package and DIN rail 35 installation
>> Industrial operating temp. Range: - 25ºC ~ + 70ºC
Voltage to 4-20mA Loop Features
>>PLC/DCS collects voltage signals directly from sensors.
>>Displacement, potentiometer signals isolated acquisition and control.
>> Industrial site ground wire interference inhibition
>> Convert weighing signal into standard 4-20mA analog signal
>> Pressure sensor signal collection and power distribution.
>> Analog signal long-distance transmission without distortion.
>>Distribution of voltage signal from electric-bridge (weighing) detecting circuits.
| Item No | DIN3 ISO V-4-20MA |
| Packaging | PCB Mounted/ DIN3/DIN35 |
Voltage to 4-20mA Converter Model Selection & General Parameters:
Pakcaging pictures as bellow:
(SIP pin packaging , DIN3 rail-mounted packaging , DIN35 Rail-mounted packaging)
For more information, please feel free to contact us:
Other products:
Commonly used two-wire passive isolation amplifier, isolation transmitter IC, Sunyuan product technical information download:
1,4-20mA (0-20mA) Current Loop Isolator IC: ISOS 4-20mA
2,4-20mA two-wire passive I/V conversion isolation transmitter IC: ISO 4-20mA-O series
3,4-20mA isolation controller (active signal PLC current loop active load) IC: ISO 4-20mA-E
4,Two-wire passive sensor 4-20mA loop isolation distributor IC: ISO 4-20mA-F
5,Two-wire voltage signal power distribution isolation transmitter IC: ISO V-4-20mA
Commonly used active type (external auxiliary power supply required) isolation amplifier transmitter IC, product selection application data download:
1,ISO mV series: millivolt-level analog small signal dedicated isolation amplifier IC
2, ISO EM U(A)-P-O-T Series: Zero-point, gain-adjustable analog isolation amplifier isolation transmitter
3, ISO EM A(U)-P-O-S Series: Input Distribution Isolation Transmitter IC
4, ISO EM-U(A)-P-O-O Series: Analog Input Isolation Transmitter with 1 to 2 Output Low Cost Small Size IC mounted Package 5, ISO EM A-P-O Series: 0-±10V Bilateral DC (Voltage/Current) Signal Isolation Amplifier Isolation Transmitter IC
6, DIN3 ISOEM U-P-O(A-P-O) Series: Single DIN35 rail mounting packaging low cost small volume isolation transmitter
7,DIN 1X2 ISOEM U(A)-P-O Series: one input and two output DIN35 rail mounting packaging isolation transmitter
8,DIN 2X1 C-P-O Series: 2 input and 1 output analog average isolation transmitter
9,DIN 2X2 ISOEM U(A)-P-O Series: two in two out DIN35 rail mounting isolation transmitter
10,DIN 1X3 ISOEM U(A)-P-O Series:one in three out DIN35 Rail mounting isolation transmitter
11,DIN ISO AC Series: Passive two-wire AC to DC signal isolation transmitter
12,ISO EMH 4-20mA Series: High isolation barrier for track voltage monitoring
13,ISO F-P-O Series: Frequency Signal (FV/FI Conversion) Isolated Converter IC
14,ISO U(A)-P-F Series: Analog Signal to Frequency Pulse Signal (V/F) Isolated Transmitter IC
15,ISO EM RMS-P-O Series: Analog True RMS (RMS) Signal Isolation Transmitter Isolation Amplifier
16.Large current output type high precision signal transmitter
Send Message
